Publications in Journals (SCOPUS Indexed, Total-36):

 

 

 

1. Kaushik Chivukula, Karthik Reddy, Ramesh Adusumalli, Padma Bonavath, Seetharaman Subramaniam, Mithun Mondal. Characterization of Environmentally Conditioned Quartz-Cyanate Ester Composites for Radome Applications. Industrial & Engineering Chemistry Research, 2022, 61,15,5158-5169, IF= 4.3

 

2. Pallavi Gulipalli, Sujay Borle, Kaushik Chivukula, Ramesh Babu Adusumalli, Processing of nanocellulose sheet for capturing fine particulate matter. Materials Today: Proceedings, 2022, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.08.189 (accepted on 24.08.22) (Science Direct), SJR Value: 0.4

 

 

2. Jose Santo, Pavan Kumar Penumakala, Ramesh Babu Adusumalli. Mechanical and electrical properties of 3D printed PLA-Graphene-Carbon nanofiber Composites in Polymer Composites. Polymer Composites, https://doi.org/10.1002/pc.26053, 2021 (30.03.2021), IF: 2.26

 

3. Viyat Mehta, Rajat Panigrahi, Pavan Kumar Penumakala, Ramesh Babu Adusumalli. Modeling the Impact Behavior of a Truck Component (RUPD) made of Composite. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.12.367. 18th Feb.2021. (Science Direct), SJR Value: 0.4

 

1. S.Aparna, D.Purnima, R.B.Adusumalli; Effect of Short Carbon Fibre Content and Water Absorption on Tensile and Impact Properties of PA6/PP Blend Based Composites. Polymer Composites 41(12), 5167-5181, 2020, IF: 2.26.

 

2. Madhuri Pydimalla, Ramesh Babu Adusumalli. Unbleached and Bleached Handsheet Characteristics of Subabul Heartwood and Sapwood. Nordic Pulp & Paper Research Journal 35 (2), 161–171, 2020. IF-0.77

 

1. Chandrakala Kunchi, Karthik Chethan Venkateshan, Ramesh Babu Adusumalli. Nanoindentation of Hair Cortex and Medulla Regions. Fibers and Polymers 2019, 20(7), 1538-1545, IMPACT FACTOR: 1.3

 

2. Chandrakala Kunchi, Karthik Chethan Venkateshan, Ramesh Babu Adusumalli. Tensile testing of single fibres. Structural Integrity Procedia 2019, 14, 150-157 (Elsevier)

 

3. Madhuri Pydimalla, Nikhil Sainath Reddy, Ramesh Babu Adusumalli. Characterization of Subabul heartwood and sapwood pulps after cooking and bleaching. Cellulose Chemistry and Technology, 53 (5-6), 479-492, 2019, IF: 0.8

 

4. Madhuri Pydimalla, Bhuvan Rohith Muthyala, Ramesh Babu Adusumalli. Influence of Temperature on Kraft pulping of Whole Bagasse and Depithed Bagasse. Sugar Technology, 21 (6), 1003-1015, 2019, IMPACT FACTOR: 0.8

 

5. Ipsita Sahoo, Chivukula Kaushik, Madhuri Pydimalla, and Ramesh Babu Adusumalli. The Influence of Super Masscolloider and Lab Valley beater on the Morphology of Sapwood Pulp Fibres; IPPTA (Indian Pulp and Paper Technology Association) - The Official International Journal; 31 (2), 2019; 112-116, SJR: 0.12

 

1.S.Aparna, D.Purnima, R.B.Adusumalli; Effect of Compatibilizer on the Properties of Polyamide-6 blend based Carbon Fiber Reinforced Composites; Fibers and Polymers 2018, 19 (6), 1335-1346, IMPACT FACTOR: 1.3

 

2.Chandrakala Kunchi, Karthik Chethan Venkateshan, Ramesh Babu Adusumalli. Effect of Scalp Position on Tensile Properties of Single Hair Fiber. International Journal of Trichology, 2018, 10, 218-228, SJR Value: 0.53

 

3.Chandrakala Kunchi, Karthik Chethan Venkateshan, NVN Deeksha Reddy, Ramesh Babu Adusumalli. Correlation between mechanical and thermal properties of human hair. International Journal of Trichology, 2018, 10, 204-210, SJR Value: 0.53

1. Aparna S, Purnima D, Ramesh Babu Adusumalli. A Review on Various Compatibilizers And Its Effect On Mechanical Properties of Compatibilized Nylon Blends. Polymer-Plastics Technology and Engineering; 56(6), 617-634, 2017, IF: 1.5

 

1. Jakob Schwiedrzik, Rejin Raghavan, Markus Rüggeberg, Silla Hansen, Juri Wehrs, Ramesh B. Adusumalli, Tanja Zimmermann & Johann Michler. Identification of polymer matrix yield stress in the wood cell wall based on micropillar compression and micromechanical modelling. Philosophical Magazine: Part A Materials Science; 96(32-34), 3461-3478, 2016.;IMPACT FACTOR: 1.6

 

2. Srikanta Dinda, Nikhil Sainath and R.B. Adusumalli. Production of bio-epoxide and bio-adhesive from non-edible oil. Korean Journal of Chemical Engineering. 33(10), 2915-2922; IMPACT FACTOR: 1.4; 2016 

 

3. Shubham Mishra, Chandrakala Kunchi, Karthik Chethan Venkateshan, Ravi Chandra Gundakaram, Ramesh Babu Adusumalli. Nanoindentaion and Tensile testing of Human Hair Fibres. Journal of Materials Science 51(22) 10191-10204;IMPACT FACTOR: 2.3; 2016 

 

4. Rohit Puntambekar, Madhuri P, Srikanta Dinda, R.B. Adusumalli. Characterization of Eucalyptus heartwood and sapwood pulp after kraft cooking. Journal of the Indian Academy of Wood Science, 13(1), 8-15; SCOPUS Indexed, SJR: 0.21; 2016

 

5. P. Madhuri, Nikhil Sainath V, Jayanty S, Adusumalli R.B. Pulp and Black Liquor Characterization of Subabul wood after kraft cooking; IPPTA (Indian Pulp and Paper Technology Association) - The Official International Journal; 28 (2); 130-142; SCOPUS Indexed, SJR: 0.12; 2016

 

1. R.B. Adusumalli, R. Passas,I Sreedhar, Balaji Krishnamurthy, B. Kombaiah, Alex Montagne. Nanoindentation of Bleached and Refined Pulp Fibres. International Journal of Materials Engineering Innovation. Vol. 5, No. 2, pp.138–150; SCOPUS Indexed, SJR: 0.16; 2014

 

2. R. Raghavan, R.B. Adusumalli, G. Buerki, S. Hansen, T. Zimmermann, J. Michler. Deformation of the compound middle lamella in spruce latewood by micro-pillar compression of double cell walls. Journal of Materials Science; 47(16):6125-6130. IMPACT FACTOR- 2.16; 2012

 

3. C. Lehringer, G. Koch, R.B. Adusumalli, W. Mook, K. Richter, H. Militz. Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 1: Aspects of delignification and surface hardness. Holzforschung (International Journal of the Biology, Chemistry, Physics, and Technology of Wood); 65(5); 711-719. IMPACT FACTOR- 2.41; 2011

 

4. R.B. Adusumalli, W. Mook, R. Passas, P. Schwaller, J. Michler. Nanoindentation of Single Pulp fibre Cell walls. Journal of Materials Science: 45(10):2558 – 2563.IMPACT FACTOR- 2.16; 2010

 

5. R.B. Adusumalli, T.Roeder, H.Weber, H.Sixta, W. Gindl. Evaluation of experimental parameters in the microbond test with regard to lyocell fibres. Journal of Reinforced Plastics and Composites :29(15):2356-67, 2010, IF: 0.9

 

6. R.B. Adusumalli, R. Raghavan, R. Ghisleni, T. Zimmermann, J. Michler. Deformation and failure mechanism of secondary cell wall in Spruce late wood. Applied Physics A - Materials Science & Processing;100(2); 447-452, 2010, IF:1.5

 

7. R.B. Adusumalli, T.Roeder, H.Weber, H.Sixta, W. Gindl. Shear strength of the lyocell fibre/polymer matrix interface evaluated with the microbond technique. Journal of Composite Materials; 46(3);359-367. IMPACT FACTOR- 0.93; 2010

 

8. R.B. Adusumalli, R.Raghavan, P. Schwaller, T. Zimmermann, J. Michler. In-situ SEM Micro-indentation of Single Wood Pulp fibres in Transverse direction. Journal of Electron Microscopy; 59(5); 345-349. IMPACT FACTOR- 1.43; 2010

 

9. C. Buksnowitz, R.B. Adusumalli, A. Pahler, H.Sixta, W. Gindl. Acoustical properties of Lyocell, hemp, and flax composites. Journal of Reinforced Plastics and Composites; 29(20):3149-3154. IMPACT FACTOR- 0.9; 2010

 

10. R.B. Adusumalli, Keckes J, Martinschitz K, Boesecke P, T.Roeder, H.Weber, H.Sixta, W. Gindl. Comparison of molecular orientation and mechanical properties of lyocell fibre tow and staple fibres. Cellulose: 16(5): 765-772. IMPACT FACTOR- 3.47; 2009

 

11. W. Gindl, M. Reifferscheid, R.B. Adusumalli, T. Roeder, H. Weber, H. Sixta, T.Schöberl.  Anisotropy of the modulus of elasticity in regenerated cellulose fibres related to molecular orientation. Polymer; 49; 792-799. IF: 3.37; 2008

 

12. R.B. Adusumalli, U.Müller, T.Roeder, H.Weber, H.Sixta, W. Gindl. Tensile Testing of Single Regenerated Cellulose Fibres, Macromolecular symposia; 244; 83-88. IMPACT FACTOR- 0.9; 2006

 

13. R.B. Adusumalli, M. Reifferscheid, T.Roeder, H.Weber, H.Sixta, W. Gindl. Mechanical Properties of Regenerated Cellulose Fibres for Composites, Macromolecular symposia; 244; 119-125.  IMPACT FACTOR- 0.9; 2006

 

1. Ramesh Babu Adusumalli, Karthik Chethan V, Wolfgang Gindl-Altmutter. Micromechanics of Cellulose Fibres and their Composites. Wood is Good: Current Trends and Future Prospects in Wood Utilization; ISBN 978-981-10-3115-1; Editors: Pandey, K.K., Ramakantha, V., Chauhan, S.S., Kumar, A.A.N; Springer Singapore; DOI: 10.1007/978-981-10-3115-1; 2016

 

2. R.B. Adusumalli, B. Kombaiah, W. Mook, R. Passas, R. Raghavan, J. Michler. Nano- and Micro-mechanics of Single Wood Pulp Fibres. Book Chapter. In Fine Structure of Papermaking Fibres, COST Action E54 “Characterisation of the fine structure and properties of papermaking fibres using new technologies”. Eds: Ander P., Bauer W., Heinemann S., Kallio P., Passas R. and Treimanis A. Swedish University of Agricultural Sciences, 147-162. ISBN 978-91-576-9007-4; 2011

 

1. Pallavi Gulipalli, Varsha Viswanathan, Chandra Babu M, Ramesh Adusumalli. Processing of packaging material using recycled fibers and unbleached subabul sapwood pulp through Nanotechnology. IPPTA (Indian Pulp and Paper Technology Association) - The Official International Journal; 35 (1) 2023; p. 149-155 (ISSN: 0379-5462) 

 

2. Chandrakala K, R.B. Adusumalli. Hardness measurement of Epoxy resin and Hair fibres using Vickers Indentation. Proceedings of  International Conference on Advanced Materials and Mechanical Characterization (ICAMMC 2021), Dec 02-04, 2021 (Virtual, Organised by SRM Univeristy, Tamilnadu, India), Pp: 460. 

 

1. D. Purnima, R.B. Adusumalli, Sourav Agarwal and S. Aparna. Prediction of Modulus of Natural Fibre Reinforced Thermoplastic Composite. Proceedings of 14th ISAMPE National Conference on Composites (INCCOM-14), Hyderabad, January 22-23, 2016. Pp: 30-39.

 

2. Rijul Nayani, Sharada Prabhakar, Anu Anna Abraham, Venkateshan.K, R.B. Adusumalli. Characterization of PAN Carbon Fiber Thermoset Composites. Proceedings of 14th ISAMPE National Conference on Composites (INCCOM-14), Hyderabad, January 22-23, 2016, Pp: 240-245.

 

3. Anirudh Rayaprolu, Rijul Nayani, R.B. Adusumalli. Wetting and interface in Composite Materials. First Andhra Pradesh Science Congress, Tirupathi, Jan. 21-23, 2016

 

4. P. Madhuri, Bipin Chakravarthy P, Nikhil S. Reddy, R.B Adusumalli. Delignification wood and characterization of pulp. First Andhra Pradesh Science Congress, Tirupathi, Jan. 21-23, 2016 

 

5. Jakob Schwiedrzik, Rejin Raghavan, Markus Rüggeberg, R.B. Adusumalli, Johann Michler, Tanja Zimmermann. Identification Of In Situ Lignin Strength Based On Micropillar Compression and Micromechanical Modeling Of Wood Cell Walls. Nanomechanical Testing in Materials Research and Development. An ECI Conference Series, October 4-9, 2015, Albufeira, Portugal

 

6. Chandrakala K, Bibhu Prasad T, Karthik Chetan V, R.B. Adusumalli. Trend Setting Innovations in Chemical Sciences and Technology -Applications in Pharma Industry -2015 (TSCST- API 2015) organised by Centre for Chemical Sciences & Technology (CCST) at JNTUH Hyderabad during 16th to 18th, December, 2015. PP: 54-55 (ISBN: 978-83-82829-48-5)

 

7. Chandrakala K, Shubham Mishra, Sakshi Khandelwal, Pushkar Prasun, Karthik Chetan, Ramesh Babu Adusumalli. Nanoindentation Studies on Human Hair Fibers. Chemference 2015, 5-6 Dec. 2015, IIT Hyderabad.

 

8. Madhuri. P, Nikhil Sai.V, Bipin Chakravarthy, Pradhyumna. K, Shyam.A, Adusumalli R.B. Characterization of Subabul Pulp after Kraft Cooking and Bleaching. Chemference 2015, 5-6 Dec. 2015, IIT Hyderabad.

 

9. Kumar Gaurav, Prashant Sharma, Garv Malik, Shivani Surisetty S V, R.B. Adusumalli, Murari R. R. Varma. Study of Suspended Particulate Matter in an Educational Institute in Suburban Region, India. Proceedings of the International Conference on Advances in Chemical Engineering, NITK Surathkal, Karnataka, India  – Dec 20-22, 2015

 

10. Madhuri. P, Nikhil Sainath V, Bipin Chakravarthy, R.B. Adusumalli. Characterization of Subabul Heartwood & Sapwood after Kraft Cooking. Proceedings of the International Conference on Advances in Chemical Engineering, NITK Surathkal, Karnataka, India  – Dec 20-22, 2015

 

1. Manne Ashish, Sharat Chandra, S. Dinda, R.B. Adusumalli. Analysis of CO and PM during incineration of Municipal Solid Waste. CHEMCON 2014, Dec. 27-30, 2014, Pp: 540-541, Chandigarh, India

 

2. R.B. Adusumalli, Bipin Chakravarthy, K.Shantanu, S.Dinda. Analysis of Wood Pulp After Cooking and Bleaching. CHEMCON 2014, Dec. 27-30, 2014, Pp: 1497-1498, Chandigarh, India

 

3. Srikanta Dinda, Prakash Purswani, Bhavana Vijay, R. B. Adusumalli, Development of Bio-Based Polymer from Nahor Oil. CHEMCON 2014, Dec. 27-30, 2014, Chandigarh, India.

 

4. Rohit Puntambekar, P. Madhuri, S. Dinda, R.B. Adusumalli. Delignification of Heartwood and Sapwood. Indo-US Conference on Advanced Lignocellulosic Biofuels. IICT Hyderabad, Nov.10-11, 2014.

5.M. Sehgal, A. Mahajan, R.B. Adusumalli. Characterization of Vegetable oils using Gas Chromatography. Innovations in Chemical Engineering edited by S. Dinda, V. Karthik Chetan, V.K. Surasani , Nov. 2013, 74-79 (ISBN No: 978-81-7800-329-0).

 

6. S. Burlawar, Preetam Giri, R.B. Adusumalli. Characterization of Wood Species: Teak, Neem, Rubber and Mesquite. Innovations in Chemical Engineering edited by S. Dinda, V. Karthik Chetan, V.K. Surasani, Nov.  2013, 80-84 (ISBN No: 978-81-7800-329-0).

 

7. M. Ashish, R.B. Adusumalli. Energy from Municipal Solid Waste with Universal Input: Indian scenario. Innovations in Chemical Engineering edited by S. Dinda, V. Karthik Chetan, V.K. Surasani, Nov. 2013, 213-217 (ISBN No: 978-81-7800-329-0).

 

8. R.B. Adusumalli, T.Roeder, H.Weber, H.Sixta, W. Gindl. Single fibre Characterisation of Viscose, Lyocell, Flax and Glass fibres. Proceedings of European Conference on Composite Materials (ECCM-12), Biarritz, France, Sept. 2006

 

9. Th. Lampke, B. Wielage, R.B. Adusumalli. Status quo and future of natural fibre reinforced composite materials in Europe. Proceedings of International Conference on Science and Technology for Sustainable Development, India. Ed: JG Ray, K Joseph, G Varghese, ISBN: 81-8424-016-3, Allied publishers Pvt Ltd.,Newdelhi, 2006, PP 255-258.