`

BITS Pilani

  • Page last updated on Monday, February 12, 2024

You are here:

Facilities

banner
Facilities
show more

Oysters Lab

 
The Electrical and Electronics Engineering department has established Oysters laboratory, which supports a full chip analog, digital and mixed signal VLSI design capability through state-of-the-art EDA tools.  These tools offers full-custom and  semicustom (Cell based and FPGA based) VLSI design capability, test circuit insertion, device modeling & simulation and process modeling & simulation. The Oysters laboratory has become a center of excellence in the field of microelectronics and VLSI areas by producing professionals who excel in innovation, entrepreneurship, creativity and management. 

List of equipments in OLab ( VLSI Design Lab)

EDA TOOLS  (SOFTWARE)

S. No

 

Software

1

Mentor Graphics EDA TOOLS

2

Magma EDA

3

Cadence EDA

4

Synopsys EDA

5

Silvaco SOFTWARE

6

Altera SOFTWARE

 7 Symica EDA AMS Tool kit


SERVERS

S.No

Server

1

Sun Firex2200

2

Sun Firev250

4

Ultra-20

5

IBM x360 M4

 6 Lenovo (SR 530)

 

KITS

S.No

Kit

1

Digilent pegasus Rapid digital circuit implementation made easy featuring Xilinx Spartan FPGAs

2

Altera Nios II Development kit

3

Altera UP3 Education kit

4

Alter DSP Development kit

 

EQUIPMENTS

S.No

Equipment

1

MSO 3012 Mixed signal Oscilloscope

2

Arbitrary/Function Generator

 
show more

Communication Systems Lab

List of equipments in Communication System Lab:
 

Serial Number

Items list

 1

   Vector Network Analyzer

 2 Spectrum Analyzer
 3

Power Meter

 4

CW Power Sensor

 5Analog Signal Generator
 6VSWR Meter 
7Klystron Power Supply
 8GUNN Power supply 
 9VCO power supply 
 10Microwave Work Bench 
 11 Microwave Work Bench set-up for Gun Diode
 12Anechoic chamber 
 13Wideband Horn antenna 
 14MATLAB R2015b, High frequency structure simulator (ANSYS HFSS v15), CST Microwave Studio 2017, NetSim v9, Adode creative cloud 4.2, Statistical package for the social sciences (IBM SPSS v24) 
 
show more

Embedded Controller Application Centre Lab

This Centre was set up in Collaboration with Motorola India Ltd. The objective of the Centre is to impart detailed understanding of important features of embedded controller architectures and familiarization of advanced concepts in the field of embedded controllers through
  • Students projects/Industrial projects
  • Imparting training to the industry professionals and running short term courses in the field of Embedded System design
  • Developing course modules  

LIST OF EQUIPMENTS IN EMBEDDED CONTROLLER APPLICATION CENTER:

Serial Number

Items list

 1 Waspmote (7) +Gateway(1)
 2 STM32 Discovery Boards
 3 Snapdragon Boards
 4 MCBSTM32F400 Development Board
 5 Motorola Development Kits
 6 Keil ARM MDK LPC2378 Dev Kit
 7 LPC2148 ARM7 Dev Kit
 8 ZedBoard FPGA Kit

9

Diligent FPGA kits

10

Avnet SDR kits

11

Xilinx University License

12

ARM-7 based Keil NXP LPC2370 Evaluation Board:

NXP LPC2378 (32-bit flash based microcontroller)

13

Atmel 8051 / C251 Keil MCBx51 Evaluation Board:

- 89C51RD2 (8-bit flash based controllers)

- TSC80252G2D (8/16-bit flash based controllers)

14

Microchip PIC 16F877 Microcontroller (8-bit) Trainer Kit

15

CY8C29466-24PXI PSoC EVAL1 Kit

16

CY3210 PSOC EVAL1 Kit

 

CY3209 Express EVK Kit

17

CY3271 Reexpansion Kit

18

CY3271 First Touch

19

Real view microcontroller development kit from Kiel for ARM and 8051 Family

20

 MPLAB IDE for PIC controllers

21

PICC ANSI C compiler from High-tech Software

22

Beagleboard + Peripherals

23

VxWorks RTOS

 
show more

Electrical Machines Lab

 
Electrical machines lab is one of the oldest lab established in the Institute. The machine lab has DC machines, AC machines and special type of machines. This lab is used by undergraduate students in their regular lab work. All available machines are having a set up bench with latest supporting measuring equipment. Lab also supports students in their different type of project work and various experiments based on machines are performed in Electrical machines course.
 

List of Equipments Available in Electrical Machines Lab

(Room No 2119)

S No

Equipment Name

 1 CBM10 MOMO/FCCP (SOFTWARE)
 2 VIRTUAL INSTRUMENTATION (SOFTWARE)
 3 CLAMP-ON TRMS POWER METER 
 4 EARTH RESISTANCE TESTER
 5 LEAKAGE CURRENT TESTER
 6 UNIVERSAL POWER SUPPLY, MAKE-LD DIDACTIC GERMANY
 7 ELECTRONIC SINGLE AND THREE PHASE MEASUREMENTS, MAKE-LD DIDACTIC GERMANY
 8 SWITCHED SINGLE & THREE PHASE RESISTIVE LOAD
 9 MACHINE TEST SYSTEM, MAKE-LD DIDACTIC GERMANY
 10 MULTIFUNCTION MACHINE, MAKE-LD DIDACTIC GERMANY
 11 THREE PHASE SYNCHRONOUS MACHINE
 12 THREE PHASE SQUIRREL CAGE & SLIP RING INDUCTION MOTOR
 13 DC COMPOUND WOUND MACHINE,MAKE-LD   DIDACTIC GERMANY
 14 SINGLE PHASE & THREE PHASE TRANSFORMER
 15 OPENLAB 0.2KW, MAKE-DE LORENZO ITALY

16

DC shunt motor coupled with dc shunt generator

17

3 Phase Induction motor coupled with dc shunt generator

18

Synchronous machine coupled with dc shunt machine

19

DC Shunt Motor

20

3 Phase Induction Motor

21

Single Phase Induction Motor

22

1 Phase Transformer 2KVA & 1 KVA

23

3 Phase Variac (Autotransformer)

24

1 Phase Variac (Autotransformer), 8A & 10A

25

Digital Tachometer

26

Digital AC Ammeter

27

Digital DC Ammeter

28

Digital AC Voltmeter

29

Digital DC Voltmeter

30

Digital Wattmeter LPF & UPF

31

Rheostat Single Barrel(280 Ohm/1.8A) and Double Barrel(100 Ohm/5A)

32

Loading Unit (Resistive Load)

33

Frequency Meter

34

Digital Insulation Tester

35

Earth Tester Range 3/30/300 Ohm

36

Clamp on Power Meter(Tong Tester)

37

Knife Switches

 
show more

Instrumentation Technology Lab

List of Equipments in Instrumentation Technology Lab:

Serial Number

Items list

 1 Auto Ranging Digital Picoammeter W. IEEE - 488 Interface Model / Part No - 485/ 4853 S.No - 587189
 2 Temperature Calibrator series TP 18600
 3 Micrologix  1000  PLC
 4True RMS Autoranging Multimeter Model No - 1087 S.No - 0028026, 030
 5Head mount temperature transmitter EQ-03 -238 
 6Pressure transmitter EQ -03- 239
 77743 - 01 NT PCI - 6024E low cost multifunction I/O 8473, 301080 NLR 
 8 776570 - 06 SCXI - 1000, U.K. 240 V ( 4 - slot chassis) 8473.30, 5000NLR
 9777935 - 01 NI PXI - 7344, 4 axis servo/step motion controller for windows 8473.30.1080 NLR 
 10NI - PXI - 6040 E and NI - DAQ software for win 2000/NT MC/9X 8473.30.1080 NLR 
 11778468 - 01 NI 8176, 1.26 GHz PXI Embedded controller with windows 2000 8471.50.0085 NLR 
 12 IMAQ PXI - 1411 and NI - IMAQ 8773.30.1080
 13 Thermo - Anemometer 
 14Professional high temperature laser targeting Infrared Thermometer supplied with 9V battery, DT8839 
 15Multimeter benchtop 
 16Milliampere source portable handhell 
 17 Smart Transmitter 0 -30 
 18Pressure Pump with standard guage 
 19Pressure Switch 0 -1  
 20Temp. Switch ( 0 - 100° C) 
 21Solenoid Valve 3 - port 2 - way spool type 1/4" 
 22 EQ04 - 710, Digital Temperature Indicator with data logging with 0 - 100° C with RS 232C Interface
 23EQ04 - 711 , LVDT Trainew Kit ( Model No - TT - LVDT) 
 24Hybrid stepper motor 6 Kg cm 
 25 Digital Multimeter 81k - TRMS 
 26Ultrasonic water level sensor 2 - 12" 
 27Solar radiation sensor 
 284-20 mA Weather station 
 29 Tipping bucket rain guage 8""
 30NI USB 6009 DAQ card 
 31 Scientific "Bench top LCR Meter SM 60191103147 
 32Techno - Instruments DC speed controller DCS - 01 
 33Techno - Instruments AC servo motor 
 34Techno -Instruments Synchro sets (Transmitter/Receiver) 
 35Techno - Instruments PID controller PID - 01 
 36Techno - Instrument compensation design 
 37Techno - Instrument temperature controller TCS - 01 
 38Techno - Instrument linear system simulator Disc  
 39Techno- Instrument linear system simulator Disc  
 40DC position control system HEM 
 41Study of potentiometer as error detector HEM 
 42Techno - Instrument DC speed controller 
 43AC servo motor 
 44DC motor position control system  
 45Oscilloscope; Digital storage, 40MHz, 500MSa/s, 2-CH Active  
 46Tristar make RTD (PTD - 100)Head type sensor 
 47Labview FDS Liscence - version 2012 
 48NI WSN starter kit (International) 
 49NI WSN - 32264 channel programmable RTD 
 50NI 9792 Programmable real time controller Integrated WSN Gateway 9 - 35VDC 
 51NI PS -15 Power supply , 24VDC , 5A 
 52NI ELVIS II Hardware ( For Academic use only) 
 53Vernier Bioinstrumentation sensor kit for NI ELVIS II 
 54Vernier Green Engineering sensor kit for NI ELVIS II 
 55NI Academic Site Liscence, Department, Fall 2012 Discount value  
 56GRAS General Purpose Array Microphone 
 57NI USB- 4432- 24 - Bit Sigma Delta ADCs 
 58GRAS General Purpose Array Microphone 
 59 USB - 6009 14 - Bit Multifunction I/O and NI- DAQmx
 60Scientech - strain Guage trainer ST - 2304 
 61Fluke digital multimeter, model - Fluke179  
 62Maxtech - Multi thermometero 0 - 200°C, model - ST - 9269 
 63Scientific LCR - Q - Meter, model - SM6019 
 64LDS Vibrator 
 65Amplifier LDSLPA 100 - 230V 
 
show more

Power Electronics Lab

Scope and Objective of the Course/Laboratory:
Power Electronics (PE) is a branch of engineering which requires the knowledge of Analog/Digital Electronics and Control Systems domain. Nowadays, PE is employed in applications ranging from few Watts residential to several Megawatts industrial systems and processes. PE is the integral part of modern technology. Application of semiconductor switching devices such as Diode, BJT, SCR, MOSFET, IGBT, GTO etc. to convert and control the amplitude and direction of power flow to met the load requirements is the main objective of this course/laboratory. Practical design issues are also covered in laboratory experiments. After successful completion of this laboratory, students will be able to design, simulate, develop and analyze the performance of various power electronic converters including AC/AC Converters, AC/DC Converters, DC/DC Converters & DC/AC Converters.
  

List of Equipments Available in Power Electronics Lab

(Room No 2118)

S No

Equipment Name

1.

CRO 20 MHz

2

DSO 40 MHz Tektronix

3

DSO 100 MHz Tektronix

4

DSO 100 MHz 4 Channel

5

Multioutput DC Power Supply

6

Single Output Variable Power Supply 0 to 65 V, 5A

7

LCR-Q Meter

8

Function Generator 2 MHz

9

1 MHz Low Distortion Signal Generator

10

Digital Multimeter RISH Max 10

11

Single Phase Variac 8A

12

Differential Probe 25 MHz

13

3 PH Bridge Diode Rectifier + 3 PH IGBT Based PWM Inverter

14

Transformer 0.5 KVA

15

Rheostat 100 Ohm/5 Amp

 16

 OPAL-RT ( Advanced Spartan 6 Based Controller OP4510-300-10Y) 

 17 dSPACE  -1104  (Advanced Control Educational Kit)
 18 Solar  PV Emulator- 2 kW, Make -Ecosense
 19 Photovoltaic Simulator Standalone Terrasas: Output Power 10kW, Open Circuit Voltage 600V, Short Circuit 17A.
 20 3 Phase IPM Power Module
 21 3 Phase 3 Level Diode Clamped Multi Level Inverter
 22 SRM Power Module
 23 High Voltage PFC and Motor Control Developers Kit
 24 BLDC Power Module
 25 Educational Practice Board for TMS320F28335
 26 TMS320 eZdsp F2812 with DSP in Socket with Fuzzy Logic
 27 Nano Board 3000 Advanced  Spartan 6 Based Controller, Make Altium & Entuple
 28 Spartan 6 FPGA Development Board
 29 Keysight Make 100KHz/100A Current Probe
 30 Fluke Make AC/DC Current Probe  Model 90I-610S
 31 CT-410 Current Monitor(Clamp-On Current Monitors), Pearson Make
 32 Oscilloscope: Digital Storage, 200MHz, 2GS/s, 4 Isolated Channels, TFT Color Display,
 33 MSOX3034A Oscilloscope: 350MHZ, 4 Analog Plus 16 Digital Channels.
 34 Power Measurement Bundle: TPS2PWR1 Module and Four  P5122 Probes
 35 Fluke Make Digital Multimeter Model : 87-V
 36 3 Phase Power Quality & Energy Analyzer with all accessories  Model  435-II,Make Fluke

 

List of SOFTWARE / KITS available in POWER ELECTRONICS Lab (Room No 2118)

S No

Software/Kit Name

1

ETAP Software

2

Matlab /Simulink with 8 other toolbox

3

PSCAD V4.1.1 EE MUL Software 20 User License

4

ACE-Kits (d- space DS1104)

5

TMDSDOCK28335 (TMS320F28335) Experiment Kit

6

NVIS-Hybrid Solar & Wind Energy Trainer NV6009

7

TMS320F2812 eZdsp System Kit

8

Emulator C2000 Series XDS510LC JTAG

9

High Voltage PFC and Motor Control Developers Kit

10

AC Induction Motor for TMDSHVMTRPFC Kit

11

Brushless DC Motor for TMDSHVMTRPFC Kit

12

3 Phase BLDC Motor Kit with DRV8312 and Piccolo MCU

 
 
show more

Wireless Communication Lab

Hardware facility:
  • Jennic ZigBee PRO Wireless Sensor Network Platform
Wireless Sensor Network (WSN) refers to a group of nodes (with some sensors on-board) connected through a wireless link and thus forming a cluster/ network to perform specific task(s) like asset management, smart lighting, remote control, etc. ZigBee PRO is the latest version of ZigBee protocol which is based on IEEE 802.15.4 standard. This WSN platform from Jennic enables users to create ZigBee/ IEEE 802.15.4 based WSN applications. The nodes in this kit have sensors for temperature, humidity and ambient light on-board. The wireless networks formed operate in the 2.4 GHz unlicensed ISM band and support a data-rate of 250KBps. Application development is done in C/C++ on Eclipse IDE with ZigBee PRO libraries provided by Jennic.
The work is carried out in this lab is mainly in the domain of developing applications for energy management.
  • TelosB IEEE802.15.4 based motes with WiEye PIR Sensor
TelosB is an IEEE 802.15.4 based WSN platform. These devices have USB programming capability, an IEEE 802.15.4 radio with integrated antenna, a low-power MCU with extended memory (of 1 MB) for data logging. They run TinyOS on them and have the capability of integrating more sensors for custom applications. The WiEye sensor has a long-range PIR sensor which can detect human presence up to 20-30 feet distance. This sensor board also has visual light and acoustic sensors enabling improved detection. These sensors can be used for surveillance and security applications.
  • Microcontroller Based GSM, RFID kits
These kits have an 8051 microcontroller interfaced to an RFID/ GSM modem. They also have some other peripherals like RTC, stepper motor controller, etc. all integrated on a single board making it suitable for small scale embedded applications for control and communication.
show more

Analog & Digital Electronics Lab

 
Analog and Digital Electronics laboratory is well equipped with state of art equipments and software tools used in signal processing, signal conditioning, signal or data analysis and signal manipulation circuits. This lab runs throughout the year providing experimental facility to nearly 500 students and caters the need of two compulsory disciplinary courses viz., Analog Electronics and Digital Electronics. The lab is extensively used by students of Electrical & Electronics Engineering, Electronics & Instrumentation and Computer Science departments for their course requirements and project work. The basic experiments are categorized in two distinct domains i.e., Analog and Digital.
Analog: In this category various electronic techniques and building blocks used in analog signal processing using discrete and integrated electronic circuits are designed and analyzed. Basic and high input resistance transistor amplifier design, Linear and non- linear applications of OPAMP, Instrumentation and Programmable amplifier design and characterization, Active filter and Precision circuits, Timer and PLL based circuits, Signal generation circuits and voltage regulator ICs are used in some of the experiments being carried out in the analog electronics lab. Texas Instrument Kits and other related analog circuits are used by the students for design, testing and development project allotted in assignments and project type course works. 
Digital: In this category various electronic techniques and building blocks used in digital signal processing using discrete and integrated electronic circuits are designed and analyzed. Experiments performed by the students in this lab include logic behaviour of various IC logic gates, propagation delay of gate, binary counter, multiplexers and de-multiplexers, combinational circuit design using decoders, BCD to seven segment decoder and display, parallel adder and substractor, BCD adder, flip flops, shift registers, design of serial adder, understanding of random access memory. Digital circuits are used by the students for design, testing and development project allotted in assignments and project type course works. 
 
 
 
List of equipments of Analog & Digital Lab (Room :2241)
 

Serial Number

Items list

 1 Digital Oscilloscope (DSO) 50MHz
 2 Pulse Generator 10MHz 
 3 Function Generator 3MHz
 4DC Multi output power supply 
 5 41/2 Display  Digital table top multimeter
 
show more

Optical Communication Lab

List of Equipments in Optical Communication Lab:

Serial Number

Items list

 1 Agilent 86142 Optical Spectrum Analyzer
 2 Agilent Technologies DSO 1022A Oscilloscope (200 MHz) (2 GSa/s)
 3 Hameg Instrument HM02022 Digital Oscilloscope (200 MHz/2Ga/2MB)
 4 Tektronix TDS 2012B Two channel digital storage oscilloscope (100 MHz, 1Gs/s)
 5 20 Mbps PRBS Generator 
 6OPTOSCI- Fiber Optic Communications Kit
 7Standa Optomechanics Board
 8 Agilent Technologies N7744A Optical Power meter

9

OptoSci Optical Prism Coupling Unit

10

Newport X-Y-Z Aligners

11

Fiber Cleaver

12

OZ Optics Optical Power meter

13

SMF Patch Cord

 14 Graded Index multimode Fiber (62.5/125/250 µm)

List of SOFTWARE available in Optical Communication Lab

S No

Software Name

1

VPIPhotonics Transmission Maker

2

Optisystem

3

OptSim

4

OCSim

5

BeamProp
 
show more

Virtual Instrumentation Lab


                                                                              
LabVIEW Setup 
National Instruments
NI PXI8176: High-performance PXI/Compact PCI-compatible system controller.
      SCXI-1000: Industrial Signal Conditional Chassis:
SCXI-1520: 8-channel universal bridge input module for Wheatstone bridge-based measurements.
SCXI-1180: feed through panel to extend the I/O signals of the plug-in DAQ board to the front of the SCXI chassis.
SCXI-1125: an eight-channel isolated analog input conditioning module with programmable gain and filter settings on each channel. Each channel has 12 programmable gain settings from 1 to 2000 and two programmable filter settings of either 4 Hz or 10 kHz. An onboard EEPROM for nonvolatile storage of software correction constants for both gain and offset.
  Lab view (vr.12) FDS Liscence - Latest version 
  NI USB 6009 DAQ card
  USB - 6009 14 - Bit Multifunction I/O and NI- DAQmx
  NI USB- 4432- 24 - Bit Sigma Delta ADCs
  NI WSN starter kit (International)
  NI WSN - 32264 channel programmable RTD
  NI 9792 Programmable real time controller Integrated WSN Gateway 9 - 35VDC
  NI ELVIS II Hardware ( For Academic use only)
  Programmable Logic Controller (Allen Bradley) Micrologix 1500 LRP Series B.
  Micrologix 1000 Analog with I/O Devices.
  DC Input Module (13 Inputs).
  AC DC Output Modules (13 outputs).
  Analog Input Module.
  Analog Input/Output combo Module.
  RS Logix 500 English Software for PLC Programming and Ladder simulation.
  RS-VIEW32 HMI (Human Machine Interface) Software.
  Weather Station consisting of:
  Infrared Temperature Scanner (0-1250?C)
  Thermocouple (Type : K, J, T & E)
  RTD (pt100)
  Programmable data - acquisition module for temperature.
  Temperature Calibrator (Sika, Germany) (RT to 620?C) 
  Thermo - Anemometer (for the measurement of wind speed and relative humidity).
  PSoC kit
  Digital Temperature Indicator with data logging with 0 - 100° C with RS 232C Interface
  LVDT Trainew Kit ( Model No - TT - LVDT)
  LVDT trainer ST – 2303
  strain Guage trainer ST – 2304
  Stepper motor interface with PCI DIOT

show more

Flexible Electronics Lab

      
 

S.no.

Equipment

Specification

1.

SMU Unit

keithley -2450

With Quick Start Software,

Power Supply -100 Vrms to 240 Vrms, 50 Hz to 60 Hz

2.

DELTASPIN

Spin-Coater

Power:220 VAC,50 HZ,2 AMP

Acceleration:300 to 2000 rpm/sec

3.

Dessigator

With High Vacuum

4.

Muffle Furnace

With Digital Controller and Temp Up to 1000 ° C

5.

Magnetic-Stirrer

With Temperature Sensor

Temp Up to 300 ° C

6.

Weighing Machine

 Max-200 gm

 Min-0.02 gm

7.

Ultra Sonic Cleaner

Temp-0 to 80 ° C , Timer 1-99 minutes, 40 KHZ
 

Quick Links

An Institution Deemed to be University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

© 2024 Centre for Software Development,SDET Unit, BITS-Pilani, India.

Designed and developed by fractal | ink design studios