BITS Pilani

  • Page last updated on Tuesday, April 02, 2024

You are here:

Publications

banner
Publications

Publications

INTERNATIONAL JOURNALS
(All these papers are available on-line on respective Journal websites)
 
. 
2024
  1. A Ul Haq, Suresh Kumar Reddy Narala. "High-velocity impact performance of sandwich panels with additively manufactured hierarchical honeycomb cores: An experimental and numerical study." Journal of Sandwich Structures & Materials, SAGE (2024). (IF:3.9, SCIE Indexed, Q1 Journal). 
  1. K.S.M. Sonti, PK Penumakala, Suresh Kumar Reddy Narala, S. Vincent. "Experimental and numerical analysis of the compression behavior of aluminum syntactic foams reinforced with alumina hollow particles." Engineering Structures, (Elsevier) (2024). (IF:5.5, SCI Indexed, Q1 Journal).
  1. Abhinav Manoj Piyush Chandra Verma, Pradnyesh Satardekar, Prabakaran Saravanan, Suresh Kumar Reddy Narala, Effect of solid lubricant particles on the tribological behavior of grease, Jurnal Tribologi 40 (2024) 247-267 (Malaysian Tribology Society) (IF:1.5, Q2 Journal). 
2023
  1. Abhinav Manoj, Ashish Saurabh, Suresh Kumar Reddy Narala, Prabakaran Saravanan, Harshad Prabhakar Natu, Piyush Chandra Verma. "Surface modification of grey cast iron by laser cladding for automative brake disc application." wear, (Elsevier) (2023). (IF:5, SCI Indexed, Q1 Journal).
  1. A UI Haq, G Gunashekar, Suresh Kumar Reddy Narala. "The Dynamic Response of AuxHex and Star-Reentrant Honeycomb Cored Sandwich panels Subject to Blast Loading." Arabian Journal for Science and Engineering, (Springer) (2023):1-17. (IF:2.807, SCIE Indexed, Q1 Journal).
  1. K.S.M. Sonti, S. Vincent, Suresh Kumar Reddy Narala. "Quasi-static compressive response and energy absorption properties of aluminum matrix syntactic foams: Room temperature and elevated temperature conditions." Materials Today Communications (Elsevier) (2023). (IF:3.662, SCIE Indexed, Q2 Journal).
  1. AU Haq, Suresh Kumar Reddy Narala. "Dynamic response of Honeycomb cored sandwich panels under high velocity impact: A numerical study." Materials Today: Proceedings (Elsevier) (2023) (Scopus).

2022

  1. Kartheek.S. M. Sonti, S. Vincent, Suresh Kumar Reddy Narala. "Effect of single and hybrid hollow sphere reinforcement on the deformation mechanism of aluminum matrix syntactic foam at a low strain rate." Journal of Alloys and Compounds (Elsevier) (2022). (IF:6.371, SCI Indexed, Q1 Journal).
  1. Chennakesava Sai Pitchi, Amrita Priyadarshini, Suresh Kumar Reddy Narala “Influence of cooling kinetics on surface texture, hydrophilicity and scratch resistance of the oxide layers produced by thermal oxidation on Ti-6Al-4V.” Surface and Coatings Technology (Elsevier) (2022): 128956. (IF: 4.865, SCI Indexed, Q1 Journal).
  1. Sheelwant A, Dutta S, Sonti KSM, Suresh Kumar Reddy Narala, Processing and Performance Assessment of Particulate TiB2 Reinforced Aluminum MMC Developed via a Novel Hybrid Ultrasonic Casting System. Materials and Manufacturing Processes. (Taylor & Francis), (2022):1-11. (IF: 4.783, SCIE Indexed, Q1 Journal).

2021

  1. Paturi, Uma Maheshwera Reddy, N. S. Reddy, Suryapavan Cheruku, Suresh Kumar Reddy Narala, Kwon Koo Cho, and M. Mohan Reddy. "Estimation of coating thickness in electrostatic spray deposition by machine learning and response surface methodology." Surface and Coatings Technology (Elsevier) (2021): 127559. (IF: 4.865, SCI Indexed, Q1 Journal).

  1. Dutta, Sunil, and Suresh Kumar Reddy Narala. "Optimizing turning parameters in the machining of AM alloy using Taguchi Methodology." Measurement (2021): 108340. (Elsevier). (IF: 5.131, SCIE Indexed, Q1 Journal).
  1.  Dutta, Sunil, and Suresh Kumar Reddy Narala. Influence of process variables on machining characteristics in turning of novel AM alloy. Journal of Engineering Manufacture (SAGE) 235, no. 6-7 (2021): 1098-1108. (IF: 2.759, SCI Indexed, Q1 Journal).

  1.  Sheelwant, Amar, Pavandatta M. Jadhav, and Suresh Kumar Reddy Narala. "ANN-GA based Parametric Optimization of Al-TiB2 Metal Matrix Composite Material Processing Technique." Materials Today Communications (Elsevier) (2021): 102444. (IF: 3.662, SCIE Indexed, Q2 Journal).

  1. Chennakesava Sai Pitchi, Amrita Priyadarshini, and Suresh Kumar Reddy Narala. "Synthesis of TiO2 coatings by thermal oxidation with a suitable cooling process for improved wettability." Surface Engineering (Taylor &Francis)(2021): 1586-1595. (IF: 2.451, SCI Indexed, Q2 Journal).
  1.  Dutta, Sunil, and Suresh Kumar Reddy Narala. "Investigations on machining characteristics and chip morphology in turning Al-Mn (AM) alloy using finite element simulation." Journal of Process Mechanical Engineering (SAGE) (2021): 09544089211014027. (IF: 1.822, SCI Indexed, Q2 Journal).

  1. Sunil Dutta, Suresh Kumar Reddy Narala, Investigations on chip formation of turned novel AM alloy, Journal of Process Mechanical Engineering (SAGE) 235, no. 2 (2021): 332-341. (IF: 1.822, SCI Indexed, Q2 Journal).

  1. Dutta, Sunil, and Suresh Kumar Reddy Narala. Investigations on surface roughness and microhardness of turned novel AM alloy. Journal of Mechanical Engineering Science (SAGE) (2021): 0954406220976162. (IF: 1.758, SCI Indexed, Q2 Journal).

  1. Kolluru Uday Kiran, Sunil Dutta, Suresh Kumar Reddy Narala. "Optimization of cutting forces and surface roughness in dry turning of AM Magnesium alloy using Taguchi Method." Materials Today: Proceedings (Elsevier) 38 (2021): 2830-2838. (Scopus). 

  1.  Sunil Dutta, Suresh Kumar Reddy Narala. "Effect of tool nose radius in turning of a novel Mg alloy." Materials Today: Proceedings (Elsevier) 38 (2021): 2675-2679. (Scopus).

  1. Dutta, Sunil, and Suresh Kumar Reddy Narala. "Alloying criteria and investigations on the properties of novel AM series alloy fabricated using stir casting." Materials Today: Proceedings (Elsevier) 44 (2021): 86-91. (Scopus). 
  1. Haq, Ahsan Ul, and Narala Suresh Kumar Reddy. "A brief review on various high energy absorbing materials." Materials Today: Proceedings (Elsevier) Vol.38P5 (2021): 3198-3204. (Scopus).

 2020

  1. Jadhav, Pavandatta Manohar, and Suresh Kumar Reddy Narala. "Tribological analysis of electrostatically developed multi (YSZ, TiN, SiC) nanocomposite coated cutting tool material." Journal of Manufacturing Processes (Elsevier) 51 (2020): 161-173. (IF: 5.684, SCIE Indexed, Q1 Journal).
  1. Dutta S.; Suresh Kumar Reddy Narala. Experimental investigation to study the effects of processing parameters on developed novel AM(Al-Mn) series alloy, Materials and Manufacturing Process (Taylor & Francis), (2020). (IF: 4.783, SCIE Indexed, Q1 Journal). 

  1. Gunda, Rakesh Kumar, and Suresh Kumar Reddy Narala. Analysis of Electrostatic Solid Lubricant Spray Process Parameters During Turning Ti-6Al-4V Alloy. Journal of Engineering Manufacture (SAGE) 234, no. 11 (2020): 1402-1414. (IF = 2.759, SCI Indexed, Q1 Journal).

  1. Melentiev, Ruslan, Fengzhou Fang, and Suresh Kumar Reddy Narala. "Influence of different pretreatments on Ti-6Al-4V surface integrity and scratch-resistance of epoxy coating: Analysis of topography, microstructure, chemistry and wettability." Surface and Coatings Technology (2020): 126436. (Elsevier). (IF: 4.865, SCI Indexed, Q1 Journal)
  1. Pavandatta Manohar Jadhav, Suresh Kumar Reddy Narala, “Analysis of novel nano composite coating for varied combinations of YSZ1-x-y, TiNx, SiNy. Tribology Transactions (Taylor & Francis) 63, no. 4 (2020): 683-703. (IF: 2.056, SCI Indexed, Q2 Journal). (official journal of the Society of Tribologists and Lubrication Engineers (STLE/ASLE), USA). 

  1. Pavandatta Manohar Jadhav and Narala Suresh Kumar Reddy, "Tribological analysis of electrostatically developed nano composite coated cutting tool material." Journal of Engineering Tribology (SAGE), 234, no. 7 (2020): 1143-1159. (IF: 1.899, SCIE Indexed, Q2 Journal).
  1. Sunil Dutta, Suresh Kumar Reddy Narala. "Adaptive & Non-cyclic Preventive Maintenance to Augment Production Activities." Journal of Quality in Maintenance Engineering (Emerald Publishing)" (2020). (IF: 1.505, Scopus, Q2 Journal).  

  1. Gunda, Rakesh Kumar, and Suresh Kumar Reddy Narala, “Tribological studies of EN31 steel and Ti-6Al-4V alloy materials using pin-on-disc tribometer.” Materials Today: Proceedings (Elsevier) 28 (2020): 1216-1220 (Scopus).

  1. P. Chennakesava Sai, Amrita Priyadarshini, Ganesh Sana, Narala Suresh K Reddy, “A Review on Alloy Composition and Synthesis of ß-Titanium Alloys for Biomedical Applications.”, Materials Today: Proceedings (Elsevier) 26 (2020): 3297-3304. (Scopus). 

  1. Gunda, Rakesh Kumar, and Suresh Kumar Reddy Narala, “Experimental investigation to study the performance of solid lubricant during turning EN31 steel and Ti-6Al-4V alloy.” Materials Today: Proceedings (Elsevier) 28 (2020): 1227-1230. (Scopus).

  1. Sheelwant, Amar, Suresh Kumar Reddy Narala, and Palaparty Shailesh. "Synthesis and tribological evaluation of aluminum-titanium diboride (Al-TiB2) metal matrix composite." Materials Today: Proceedings (Elsevier) 28 (2020): 651-658. (Scopus).
  1. Jadhav, Pavandatta Manohar, and Suresh Kumar Reddy Narala. "Tribological characterization of electrostatically developed Al2O3 coated cutting tool material." Materials Today: Proceedings (Elsevier) 28 (2020): 672-677. (Scopus).

 

2019

  1. Gunda, Rakesh Kumar, and Suresh Kumar Reddy Narala. Electrostatic high-velocity solid lubricant machining system for performance improvement of turning Ti–6Al–4V alloy. Journal of Engineering Manufacture (2019) (SAGE): 0954405417703432. (IF: 2.759, SCI Indexed, Q1 Journal).

2018

  1. Josyula, Sravan Kumar, and Suresh Kumar Reddy Narala. "Study of TiC particle distribution in Al-MMCs using finite element modeling." International Journal of Mechanical Sciences (Elsevier) 141 (2018): 341-358. (IF: 6.772, SCI Indexed, Q1 Journal)

  1. Josyula Sravan Kumar, Narala Suresh Kumar Reddy, Performance enhancement of cryogenic machining and its effects on tool wear during turning of Al-TiCp composite, Machining Science and Technology (Taylor & Francis), 22 (2), (2018), 225-248 (IF: 2.154, SCIE Indexed, Q2 Journal)

  1. Paturi, Uma Maheshwera Reddy, Suresh Kumar Reddy Narala, and Sriker Kakustam. "Investigations on the effects of different constitutive models in finite element simulation of machining." Materials Today: Proceedings (Elsevier). 5(11) (2018): 25295-25302 (Scopus).

  1. Jadhav, Pavandatta M., and Narala Suresh Kumar Reddy. "Wear behavior of carbide tool coated with Yttria-stabilized zirconia nano particles." Materials Science and Engineering, vol. 346, no. 1, p. 012007. IOP Publishing, 2018. (Scopus)
  1. Paturi, Uma Maheshwera Reddy, Harish Devarasetti, David Abimbola Fadare, and Suresh Kumar Reddy Narala. "Application of Artificial Neural Network and Response Surface Methodology in Modeling of Surface Roughness in WS2 Solid Lubricant Assisted MQL Turning of Inconel 718." Materials Science and Engineering, vol. 346, no. 1, p. 012085. IOP Publishing, 2018. (Scopus)
  1. Regalla, Srinivasa Prakash, V. Krishnan Anirudh, and Suresh Kumar Reddy Narala. "Tribological performance of Zinc soft metal coatings in solid lubrication." Materials Science and Engineering, vol. 346, no. 1, p. 012022. IOP Publishing, 2018. (Scopus)

  1. Paturi, Uma Maheshwera Reddy, Harish Devarasetti, and Suresh Kumar Reddy Narala. "Application of Regression and Artificial Neural Network Analysis in Modelling of Surface Roughness in Hard Turning of AISI 52100 Steel." Materials Today: Proceedings (Elsevier). 5(2), (2018): 4766-4777. (Scopus)
  1. Mundada, Venkatesh, and Suresh Kumar Reddy Narala, "Optimization of Milling Operations Using Artificial Neural Networks (ANN) and Simulated Annealing Algorithm (SAA)." Materials Today: Proceedings (Elsevier). 5(2) (2018): 4971-4985. (Scopus)

 

2017
  1. Gunda, Rakesh Kumar, and Suresh Kumar Reddy Narala. "Evaluation of friction and wear characteristics of electrostatic solid lubricant at different sliding conditions." Surface and Coatings Technology (Elsevier), 332 (2017): 341-350. (IF: 4.865, SCI Indexed, Q1 Journal).
  1. Josyula Sravan Kumar, Narala Suresh Kumar Reddy, Machinability Enhancement of Stir Cast Al-TiCp Composites under Cryogenic Condition, Materials and Manufacturing Processes (Taylor & Francis), 32 (15), (2017), 1764-1774. (IF: 4.783, SCIE Indexed, Q1 Journal).
  1. A Marques, Suresh Kumar Reddy Narala, AR Machado, Rakesh Kumar Gunda, Saravan Kumar Josyula, RB Da Silva, MB Da Silva, Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718, Journal of Engineering Manufacture (SAGE), 1-10, (2017). (IF = 2.759, SCI Indexed, Q1 Journal).
  1. Uma Maheshwera Reddy Paturi, Narala Suresh Kumar Reddy, Electrostatic Solid Lubricant Coatings: Optimization of Process Parameters and Performance in Tribological Tests, Solid State Phenomena (Scientific.net), 266, (2017), 64-68. (IF:0.663, Scopus, Q3 Journal).
2016
  1. Rakesh Kumar Gunda, Narala Suresh Kumar Reddy, Tribological Studies to Analyze the Effect of Solid Lubricant Particle Size on Friction and Wear Behaviour of Ti-6Al-4V Alloy, Surface and Coatings Technology (Elsevier), 308, (2016), 203-212. (IF: 4.865, SCI Indexed, Q1 Journal)
  1. Josyula Sravan Kumar, Narala Suresh Kumar Reddy, Experimental investigation on tribological behaviour of Al-TiCp composite under sliding wear conditions, Journal of Engineering Tribology (SAGE), 230 (8), 919-929, (2016). (IF: 1.899, SCIE Indexed, Q2 Journal)
  1. Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Constitutive flow stress formulation for aeronautic aluminum alloy AA7075-T6 at elevated temperature and model validation using finite element simulation, Journal of Materials: Design and Applications (SAGE), Vol no:230 (Issue 6), Pg no. 994 - 1004, (2016). (IF = 2.663, SCIE Indexed, Q2 Journal).
  1. Rakesh Kumar Gunda, Narala Suresh Kumar Reddy, H.A. Kishawy A Novel Technique to Achieve Sustainable Machining System, Procedia CIRP (Elsevier), 40, 30-34, (2016). (Scopus)
  1. Josyula Sravan Kumar, Narala Suresh Kumar Reddy, Sustainable Machining of Metal Matrix Composites Using Liquid Nitrogen, Procedia CIRP (Elsevier), 40, 568-573, (2016). (Scopus)
  1. Uma Maheshwera Reddy Paturi, Yesu Ratnam Maddu, Ramalinga Reddy Maruri, Narala Suresh Kumar Reddy, Measurement and Analysis of surface Roughness in WS2 Solid Lubricant Assisted Minimum Quantity Lubrication (MQL) in Turning of Inconal 718, Procedia CIRP (Elsevier), 40, 138-143, (2016). (Scopus)

2015
  1. Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Experimental investigation to study the effect of electrostatic micro-solid lubricant–coated carbide tools on machinability parameters in turning, Journal of Engineering Manufacture (SAGE), 229 (5), 693-702, (2015). (IF: 2.759, SCI Indexed, Q1 Journal)
  1. Hossam A Kishawy, Narala SK Reddy, Amirmohammad Ghandehariun, Hussein M Abdelmoneam. On a novel solid lubricant–coated cutting tool: Experimental investigation and finite element simulations, Journal of Engineering Manufacture (SAGE), 229, 1893-1899 (2015). (IF: 2.759, SCI Indexed, Q1 Journal)
  1. Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, On a novel solid lubricant technique: A study on the tribological characteristics under dry slide condition, Journal of Engineering Tribology (SAGE), 229, 1503-1512, (2015). (IF: 1.899, SCIE Indexed, Q2 Journal)
2014
  1. Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Constitutive flow stress formulation, model validation and FE cutting simulation for AA7075-T6 aluminum alloy, Materials Science and Engineering: A (Elsevier), 605, 176-185, (2014). (IF: 6.044, SCI Indexed, Q1 Journal)
  1. Josyula Sravan Kumar, and Narala Suresh Kumar Reddy, A Brief Review on Manufacturing of Al-TiC MMC, In Advanced Materials Research (Scientific.net), 980, 62-68, (2014).

2011

  1. N. Suresh Kumar Reddy, Mohammed Nouari, The influence of solid lubricant for improving tribological properties in turning process, Lubrication Science (Wiley), 23, 49-59, (2011). (IF: 1.307, SCIE Indexed, Q2 Journal)

2010

  1. N. Suresh Kumar Reddy, Yang Minyang, Development of Electro Static Lubrication (ESL) System for Drilling of SCM 440 Steel, Journal of Engineering Manufacture (SAGE) 224 (2), 217-224, (2010). (IF: 2.759, SCI Indexed, Q1 Journal)
  1. Narala Suresh Kumar Reddy, Mohammed Nouari, Yang Minyang, Development of electrostatic solid lubrication system for improvement in machining process performance, International Journal of Machine Tools and Manufacture (Elsevier), 50(9), 789- 797, (2010). (IF: 10.331, SCI Indexed, Q1 Journal).

2008

  1. N. Suresh Kumar Reddy, Shin Kwang-Sup, Yang Minyang, Experimental study of Surface Integrity during End Milling of Al/SiC Particulate Metal Matrix Composites, Journal of Materials Processing Technology (Elsevier), 201(1-3), 574-579, (2008). (IF: 6.162, SCIE Indexed, Q1 Journal).
2007
  1. Deep Mukhopadhyay, Sanka Banerjee and N. Suresh Kumar Reddy, Investigation to Study the Applicability of Solid Lubricant in Turning of AISI 1040 steel, Journal of Manufacturing Science and Engineering (ASME), 129, 520-526, (2007). (IF: 3.952, SCIE Indexed, Q1 Journal).

2006

  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Experimental Investigation to Study the Effect of Solid Lubricants on Cutting Forces and Surface Quality in End Milling, International Journal of Machine Tools and Manufacture (Elsevier), 46(2), 189-198, (2006). (IF: 10.331, SCI Indexed, Q1 Journal).
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Selection of an Optimal Parametric Combination for Achieving Better Surface Finish in End Milling using Genetic Algorithms, International Journal of Advanced Manufacturing Technology (Springer), 28(5-6), 463-473, (2006). (IF: 3.563, SCIE Indexed, Q1 Journal).

2005

  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Performance Improvement of End Milling Using Graphite as a Solid Lubricant, Materials and Manufacturing Processes (Taylor & Francis), 20(4), 673-686, (2005). (IF: 4.783, SCIE Indexed, Q1 Journal).
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Selection of Optimum Tool Geometry and Cutting Conditions using a Surface Roughness Prediction Model for End Milling, International Journal of Advanced Manufacturing Technology (Springer), 26(11-12), 1202- 1210, (2005). (IF: 3.563, SCIE Indexed, Q1 Journal).
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, A Genetic Algorithmic Approach for Optimization of Surface Roughness Prediction Model in Dry Milling, Machining Science and Technology (Taylor & Francis), 9(1), 63-84, (2005). (IF: 2.154, SCIE Indexed, Q2 Journal).

 ============================================================================
 
INTERNATIONAL CONFERENCES
 
2023.
  1. AU Haq, Suresh Kumar Reddy Narala. "Dynamic response of Honeycomb cored sandwich panels under high velocity impact: A numerical study." 2nd International conference & Exposition on Mechanical, Material and Manufacturing Technology, 28-29 October 2022 (Online:2023), CVR College of Engineering, Hyderabad, INDIA.
 
2021.
  1. Haq Ahsan Ul, and Narala Suresh Kumar Reddy. "A brief review on various high energy absorbing materials." International conference & Exposition on Mechanical, Material and Manufacturing Technology, 10 October 2020 (Online:2021), CVR College of Engineering, Hyderabad, INDIA. 
 
2020.
  1. P. Chennakesava Sai, Amrita Priyadarshini, Ganesh Sana, Narala Suresh K Reddy, “A Review on Alloy Composition and Synthesis of ß-Titanium Alloys for Biomedical Applications.”, 10th International Conference of Material Processing and Characterization (ICMPC), 10th February 2020, GLA Mathura INDIA. (Accepted for oral presentation)
 
2018.
  1. Sunil Dutta, Suresh Kumar Reddy Narala, Analysis of Coating Physiognomies and Surface Integrity of Magnesium Alloys, 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 24th – 28th April 2018, San Diego, California, USA. (Accepted for oral presentation).
  1. Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Effect of electrostatic solid lubrication on tribological behavior of Ti-6Al-4V alloy, 6th Asia International Conference on Tribology, 17th – 20th September 2018, Malaysia. (Accepted for oral presentation).
  1. Pavandatta M Jadhav, Suresh Kumar Reddy Narala, Wear mechanism and tribological characterization of novel nano-composite coated cutting tool material, 6th Asia International Conference on Tribology, 17th – 20th September 2018, Malaysia. (Accepted for oral presentation).
  1. Amar Sheelwant, Suresh Kumar Reddy Narala, Synthesis and Tribological Evaluation of Aluminium - Titanium Diboride (Al/TiB2) Metal Matrix Composite, 6th Asia International Conference on Tribology, 17th – 20th September 2018, Malaysia. (Accepted for oral presentation).
2017.
  1. Pavandatta M Jadhav, Suresh Kumar Reddy Narala, Wear Behavior of carbide tool coated with Yttria-Stabilized Zirconia nano particles, International Conference on Recent advances in Material and Manufacturing Technologies (IMMT 2017), 28-29 November, 2017, BITS-Pilani, Dubai Campus, Dubai, UAE.
  1. Amar Sheelwant, Suresh Kumar Reddy Narala, Palaparty Shailesh, Synthesis and Characterization of Stir Cast Aluminium-Titanium Diboride (Al-TiB2) MMC, International Conference on Recent advances in Material and Manufacturing Technologies (IMMT 2017), 28-29 November, 2017, BITS-Pilani, Dubai Campus, Dubai, UAE.
  1. Srinivasa Prakash Regalla, V. Krishnan Anirudh, N. Suresh Kumar Reddy, Tribological Performance Of Zinc Soft Metal Coatings In Solid Lubrication, International Conference on Recent advances in Material and Manufacturing Technologies (IMMT 2017), 28-29 November, 2017, BITS-Pilani, Dubai Campus, Dubai, UAE.
  1. Uma Maheshwera Reddy Paturi, Harish Devarasetti, David Abimbola Fadare and Suresh Kumar Reddy Narala, Application of Artificial Neural Network and Regression Analysis in Modeling of Surface Roughness in WS2 Solid Lubricant Assisted MQL Turning of Inconel 718, International Conference on Recent advances in Material and Manufacturing Technologies (IMMT 2017), 28-29 November, 2017, BITS-Pilani, Dubai Campus, Dubai, UAE.
  1. Uma Maheshwera Reddy Paturi and Suresh Kumar Reddy Narala, Electrostatic Solid Lubricant Coatings: Optimization of Process Parameters and Performance in Tribological Tests, 8th International Conference on Materials and Manufacturing Technology(ICMMT 2017), 4-6 May, 2017, NTU Singapore.
  1. Amar Sheelwant, Suresh Kumar Reddy Narala, Palaparty Shailesh, Investigation of Tribological Properties of Aluminium-Titanium Diboride (Al/TiB2) MMC under Dry Sliding Condition, 44th International Conference on Metallurgical Coatings and Thin Films, April 24-28, 2017, San Diego, California, USA.
2015.
  1. Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, H.A. Kishawy A novel technique to achieve sustainable machining system, Global Conference on Sustainable Manufacturing, September 2015, Ho-Chi-Minh-City, Vietnam.
  1. Josyula Sravan Kumar, Narala Suresh Kumar Reddy, Sustainable Machining of Metal Matrix Composites Using Liquid Nitrogen, Global Conference on Sustainable Manufacturing, September 2015, Ho-Chi-Minh-City, Vietnam.
  1. Uma Maheshwera Reddy Paturi, Yesu Ratnam Maddu, Ramalinga Reddy Maruri, Narala Suresh Kumar Reddy, Measurement and Analysis of surface Roughness in WS2 Solid Lubricant Assisted Minimum Quantity Lubrication (MQL) in Turning of Inconal 718, Global Conference on Sustainable Manufacturing, September 2015, Ho-Chi-Minh-City, Vietnam.
  1. Armando Marques, Marcelo do Nascimento Sousa, Narala Suresh Kumar Reddy, Alisson RochaMachado, Life of the cutting tool and wear mechanisms in turning the inconel 718 with application using graphite as a solid lubricant, 8º Congresso Brasileiro de Engenharia de Fabricaçao, 18-22 May 2015, Salvador, Bahia, Brasil.
2014.
  1. A. Marques, M. B. Da Silva, N. S. K. Reddy, E. O. Ezugwu, R. B. Da Silva, A. R. Machado, Application of Solid Lubricant by MQL in Turning of Inconel 718, Lubrication, Maintenance and Tribotechnology LUBMAT 2014, Manchester, UK.

2013.

  1. Uma Maheshwera Reddy P and N. Suresh Kumar Reddy, Finite Element Analysis and Study of Tool Wear in Machining With Coated Tools, ASME 2012 IMECE, Nov 9-15 2013 San-Diego, California, USA.
  1. N. Suresh Kumar Reddy, Hossam A Kishawy, Beneficial Effects of Solid Lubricant Mixture Assisted Machining, Conference: 41 North American Manufacturing Research Institution of SME (NAMRI/SME), 2013 University of Wisconsin-Madison, USA.

2012.

  1. Anup Darshan, Uma Maheshwera Reddy P, N. Suresh Kumar Reddy and Srinivasa Prakash Regalla, A comparative study of tribological behavior of steel sliding against wc under mineral and biodegradable oil lubrication, ASME 2012 IMECE, Nov 9-15 2012 Houston, Texas, USA.
  1. Uma Maheshwera Reddy P and N. Suresh Kumar Reddy, Investigation on wear behavior of electrostatic micro-solid lubricant coatings under dry sliding conditions, ASME 2012 IMECE, Nov 9-15 2012 Houston, Texas, USA.

2010.

  1. N. Suresh Kumar Reddy and M. Nouari, A comparative study on the role of solid lubricant for improving tribological properties in turning process, 2010, 37th International conference on metallurgical coatings and thin films, San Diego, USA.

2008.

  1. N. Suresh Kumar Reddy, Jun Kang Min, Yang Minyang, Investigations on drilling SCM440 steel with electro static lubricant (ESL) system, 2008, Proceedings of KSME-2008 fall conference, Yong Pyong Resort, South Korea. (Secured Best Paper Award). Number of Citations: 1
  1. N. Suresh Kumar Reddy, Jun Kang Min, Yang Minyang, Performance evaluation of various coated drills based on wear and hole quality in dry drilling, 2008, Proceedings of KSMTE conference, 2008, Mokpo, South Korea. (Secured Best Paper Award).

2007.

  1. N. Suresh Kumar Reddy, Shin Kwang Sup, Yang Minyang, Experimental study to improve performance of turning AISI 1040 steel using solid lubricant, 2007, KSME-2007 Conference, Seoul National University, South Korea.

2006.

  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Enhancement of machinability of AISI1045 steel using molybdenum disulphide as a solid lubricant, 2006, Proceedings of ASME International Mechanical Engineering Congress Conference, Chicago, Illinois, U.S.A. Number of Citations = 1.
2004.
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Selection of Optimal Tool Geometry and Cutting Conditions in End Milling with Graphite as a Solid Lubricant, 2004, Proceedings of “ASME International Mechanical Engineering Congress Conference”, Anaheim, California, U.S.A.

============================================================================

NATIONAL CONFERENCES
 
2017. 

  1. Uma Maheshwera Reddy Paturi, Harish Devarasetti, Suresh Kumar Reddy Narala, Application Of Regression And Artificial Neural Network Analysis In Modelling Of Surface Roughness In Hard Turning Of AISI 52100 Steel, The International Conference on Materials Processing and Characterization (ICMPC), 17th to 19th March, 2017, Hyderabd, Telangana, India

  1. Venkatesh Mundada, Narala Suresh Kumar Reddy, Optimization of Milling Operations Using Artificial Neural Networks (ANN) and Simulated Annealing Algorithm (SAA), International Conference on Materials Processing and Characterization (ICMPC), 17th to 19th March 2017, Hyderabad, Telangana, India.
2016.
  1. Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, New cooling approach for tool life improvement with minimal quantity solid lubricant machining of Ti-6Al-4V alloy, 2016, 6th International and 27th All India Manufacturing Technology, Design and Research Conference, College of Engineering., Pune, Maharashtra, India.
  1. Sravan Kumar Josyula and Suresh Kumar Reddy Narala, Enhancement of Cryo Assisted Machining Performance during Turning of Al-5% TiCp Metal Matrix Composite, 2016, 6th International and 27th All India Manufacturing Technology, Design and Research Conference, College of Engineering., Pune, Maharashtra, India.
  1. Syed Adil, Rakesh Kumar G, N Suresh Kumar Reddy, Study of Tribological Characteristics of Tungsten Carbide and EN-31 Steel Combination under Different Environmental Conditions, Proceedings of 2nd DPLC Conference 2016, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. Bhasker Reddy Marri, Meghana M, Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Optimization of Milling Using Simulated Annealing and Artificial Neural Networks, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India
  1. Ramakrishna Balijepalli, P. Shailesh, N. Suresh Kumar Reddy, Improvement of Heat Transfer Rate of Condenser by Using a Novel Online Tube Cleaning System, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. Chennu Vinodh Reddy, N. Suresh Kumar Reddy, G. Janardhana Raju, Optimization of Process Parameters in CNC Wire Cut EDM using Taguchi Method for Effective machining of Stavax ESR, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. Tahsildar Yadav, P.Bhramara, N. Suresh Kumar Reddy, Development of Gas-Assisted Mold Temperature Control (GMTC) system to improve performance of Injection moulding, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Tribological Studies of Solid Lubricants on Ball-on-Disc Tribometer, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. E. Gurucharan, Sravan Kumar Josyula, Sanchay Bapat, Meghana Maddala, Suresh Kumar Reddy Narala, V.Kalyan Chakravarty, Evaluating the Performance of End Milling of Hybrid Laminates under Dry And Cryo Milling Environments Through Experimental Analysis, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.
  1. Sravan Kumar Josyula, Narala Suresh Kumar Reddy, Tribological behaviour of Al-TiCp Composite under Cryogenic Environment, Proceedings of 2nd DPLC Conference, BITS-Pilani Hyderabad Campus, Hyderabad, India.

2014.

  1. J. Sravan Kumar, G. Rakesh Kumar and N. Suresh Kumar Reddy, A Study for Selection of Cutting Parameters in Turning Process using Decision Making Method, 2014, ICARIM, Warangal, India.
2004.
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Experimental Investigation to Study the Effect of Cutter Geometry on Surface Generation in Dry Milling, 2004, Proceedings of 21st AIMTDR Conference, VIT, Vellore, India.
2003.
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Effect of Cutter Geometry on Surface Generation in End Milling, 2003, Proceedings of CARTM 2003, KEC, Kalyani, India.
2002.
  1. N. Suresh Kumar Reddy and P. Venkateswara Rao, Experimental Investigation of Surface Quality of the Turned Components with and Without Using Cutting Fluids, 2002, Proceedings of MINAC-2002, JNTU, Anantapur.

Quick Links

    An Institution Deemed to be University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2024 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios