BITS Pilani

  • Page last updated on Friday, October 27, 2017

Publications

banner
Publications

Publications

 

Books

 

  • S. P Regalla and Kuldip Singh Sangwan, Product Design and Manufacturing: A Product Life Cycle Approach, New Age International Pvt. Ltd., New Delhi, 2014, ISBN 978-81-224-3608-2
  • Kuldip Singh Sangwan, A K Digalwar and Monica Sharma (eds), Sustainable Manufacturing, EPH, New                 Delhi, 2011,       ISBN 978-93-81583-10-4. 

 

 

 
  
Journals
 
                                                                                       2016
 

 

 

1.      A Jindal, KS Sangwan, Multi-objective fuzzy mathematical modelling of closed-loop supply chain considering economical and environmental factors, Annals of Operations Research, 2016, 1-26, DOI 10.1007/s10479-016-2219-z

 

2.      J. Bhamu and K.S. Sangwan (2016) ‘A framework for lean manufacturing implementation’, Int. J. Services and Operations Management, 2016, Vol. 25, No. 3, pp.313–333

3.      K S Sangwan, Christoph Herrmann, Patricia Egede, Vikrant Bhakar, Jakob Singer, Life Cycle Assessment of Arc Welding and Gas Welding Processes, Procedia CIRP, 48, 2016, 62-67

4.  V Bhakar, DNSH Kumar, NK Sai, KS Sangwan, S Raghuvanshi, Life Cycle Assessment of Filtration Systems of      Reverse Osmosis Units: A Case Study of a University Campus, Procedia CIRP, 40, 2016, 268-273.
 
5. A Jindal, KS Sangwan, A fuzzy-based decision support framework for product recovery process selection in reverse logisticsInternational Journal of Services and Operations Management 25 (4), 413-439
 
  
                                                                     2015

1.      Kuldip Singh Sangwan and Varinder Kumar Mittal, A bibliometric analysis of green manufacturing and similar frameworks, Management of Environmental Quality: An International Journal, 2015, Vol. 26, No 4, pp. 566-587.

   2.      G Kant, KS Sangwan, Predictive Modelling and Optimization of Machining Parameters to Minimize Surface Roughness using Artificial Neural Network Coupled with Genetic Algorithm, Procedia CIRP, Vol 31, 2015, pp. 453-458.

   3.      K S Sangwan, S Saxena, G Kant, Optimization of Machining Parameters to Minimize Surface Roughness using Integrated ANN-GA Approach, Procedia CIRP, Vol 29, 2015, pp.305-310.

   4.      Jindal, A. and Sangwan, K. S., Network Design and Optimization for Multi-product, Multi-time, Multi-echelon Closed-loop Supply Chain under Uncertainty, Procedia CIRP, 2015, Vol 29, pp. 658-663.

   5.      V Bhakar, N Sihag, R Gieschen, A Stefan, C Herrmann, K S Sangwan, Environmental impact analysis of a water supply system: study of an Indian university campus, Procedia CIRP, 2015, Vol 29, pp. 469-474.

   6.      Life Cycle Assessment of CRT, LCD and LED Monitors, Procedia CIRP, 2015, Vol 29, pp. 433-438.

   7.      A Garg, V Vijayaraghavan, CH Wong, K Tai, PM Singru, SS Mahapatra, KS Sangwan, Investigation of mechanical strength of 2D nanoscale structures using a molecular dynamics based computational intelligence approach, International Journal of Modern Physics B, 2015, Vol. 29, No. 1, pp. 1450242

   8.      Jindal, A. and Sangwan, K. S., Evaluation of collection methods in reverse logistics by using fuzzy mathematics, Benchmarking: An International Journal, 2015, Vol. 22 No. 4, pp 393-410.

   9.      A K Digalwar, Anil Jindal, K S Sangwan, Modeling the performance measures of world class manufacturing using interpreting structural modeling, Journal of Modelling in Management, 2015, Vol. 10, No.1, pp. 4-22.

   10. Varinder Kumar Mittal and Kuldip Singh Sangwan, Ranking of Drivers for Green Manufacturing Implementation Using Fuzzy Technique for Order of Preference by Similarity to Ideal Solution Method, Journal of MultiCriteria Decision Analysis, 2015, Vol 22, No.1-2, pp. 119-130.

11. J Bhamu and K S Sangwan, Reduction of Post-kiln Rejections for Improving Sustainability in Ceramic Industry: A Case Study, Procedia CIRP, 2015, Vol 26, pp. 618-623.

12. G Kant and K S Sangwan, Predictive Modeling for Power Consumption in Machining Using Artificial Intelligence Techniques, Procedia CIRP, 2015, Vol. 26, pp. 403-407.

13. A Garg, V Vijayaraghavan, CH Wong, K Tai, SS Mahapatra, KS Sangwan, An ensemble evolutionary approach in    evaluation of surface finish reduction of vibratory finishing process, Journal of Engineering Computation, 2015, Vol 32, No    5, pp xxxx

 

2014

1.      G Kant, KS Sangwan, Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining, Journal of Cleaner Production, 2014, Vol 83, pp 151-164.

2.      V Vijayaraghavan, A Garg, K Tai, PM Singru, L Gao, KS Sangwan, A Molecular Dynamics Based Artificial Intelligence Approach for Characterizing Thermal Transport in Nanoscale Material, Thermochimica Acta, 2014, vol. 594, pp 39-49.

3.      Anil Jindal and Kuldip Singh Sangwan, Closed loop supply chain network design and optimisation using fuzzy mixed integer linear programming model, International Journal of Production Research, 2014, Vol 52, No 14, pp 4156-4173.

4.      Jaiprakash Bhamu and Kuldip Singh Sangwan, Lean Manufacturing: Literature review and research issues, International Journal of Operations and Production Management, vol 34, No 7, 2014, pp 876-940.

5.      Varinder Kumar Mittal and Kuldip Singh Sangwan, Prioritizing barriers to green manufacturing: environmental, social and economic perspectives, Procedia CIRP, Vol 17, 2014, pp 559-564.

6.      Varinder Kumar Mittal and Kuldip Singh Sangwan, Modeling Drivers for Successful Adoption of Environmentally Conscious Manufacturing, Journal of Modelling in Management, vol. 9, no. 2, 2014, pp. 127-140.

7.      Kuldip Singh Sangwan, Vikrant Bhakar, Shilpa Naik and Sylvi Nazareth Andrat, Life cycle assessment of incandescent, fluorescent, compact fluorescent and light emitting diode lamps in an Indian scenario, Procedia CIRP, Vol 15, 2014, pp 467-472.

8.      Varinder Kumar Mittal and Kuldip Singh Sangwan, Prioritizing drivers for green manufacturing: environmental, social and economic perspectives, Procedia CIRP, Vol 15, 2014, pp 135-140. 

9.      Kuldip Singh Sangwan and Varinder Kumar Mittal, Fuzzy TOPSIS method for ranking barriers to environmentally conscious manufacturing implementation: government, industry and expert perspectives, International Journal of Environmental Technology and Management, vol 17, No. 1, 2014, pp 57-82

10. Varinder Kumar Mittal and Kuldip Singh Sangwan, Development of a Structural Model of Environmentally Conscious Manufacturing Drivers, Journal of Manufacturing Technology Management, vol 25, no 8, 2014, pp 1195-1208.

11. Varinder Kumar Mittal and Kuldip Singh Sangwan, Development of a Model of Barriers to Environmentally Conscious Manufacturing Implementation, International Journal of Production Research, vol. 52, no 2, 2014, pp 584-594.

  
2013 
 
 1.    Anil Jindal and Kuldip Singh Sangwan, Development of an Interpretive Structural Model of Drivers for Reverse Logistics Implementation in Indian Industry, International Journal of Business Performance and Supply Chain Management, vol. 15, No. 4, 2013, pp 325-342

2.      Varinder Kumar Mittal and Kuldip Singh Sangwan, Assessment of hierarchy and inter-relationships of barriers to Environmentally Conscious Manufacturing Adoption, World Journal of Science, Technology and Sustainable Development  10 (4), 2013, pp. 297-307

3.      Navneet Khanna, Kuldip Singh Sangwan, Machinability analysis of heat treated Ti64, Ti54M and Ti10.2.3 titanium alloys, International Journal of Precision Engineering and Manufacturing, vol 14, No. 5, 2013, pp 719-724.

4.      Navneet Khanna, Kuldip Singh Sangwan, Interrupted machining analysis for Ti6Al4V and Ti5553 titanium alloys using physical vapor deposition (PVD)–coated carbide inserts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol 227, No. 3, 2013, pp 465-470.

5.      Navneet Khanna, Kuldip Singh Sangwan, Machinability study of α/β and β titanium alloys in different heat treatment conditions, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol 227, No. 3, 2013, pp 357-361.

6.      J P Bhamu, Ankit Khandelwal and Kuldip Singh Sangwan, Lean manufacturing implementation in an automated production line: a case study, International Journal of Services and Operations Management, vol 15, No 4, 2013, pp 411-429.

7.      Kuldip Singh Sangwan, Evaluation of manufacturing systems based on environmental aspects using a multi criteria decision model, International Journal of Industrial and Systems Engineering, vol 14, No. 1, 2013, pp 40-57.

8.      Navneet Khanna, Kuldip S Sangwan, Comparative machinability study on Ti54M titanium alloy in different heat treatment conditions, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol 227, No. 1, 2013, pp 96-101.

9. Girish Kant, Kuldip Singh Sangwan, Aditya Deshpande, Pankaj Sharma, Modeling of Stresses and Temperature in Turning Using Finite Element Method, Applied Mechanics and Materials, Vol 307, 2013, pp 174-177.

10. V Rao, Girish Kant, Kuldip Singh Sangwan, Predictive Modeling of Turning Operations Using Response Surface Methodology, Applied Mechanics and Materials, Vol 307, 2013, pp 170-173.

11. P J Singh, V Kumar and Kuldip Singh Sangwan, Development and Validation of Performance Measures for Environmentally Conscious Manufacturing, International Journal of Services and Operations Management, vol 14, No.2, 2013, pp 197-220.

12. Kuldip Singh Sangwan and Anil Jindal, An integrated fuzzy multi-criteria evaluation of lithium ion battery recycling processes, International Journal of Sustainable Manufacturing, vol. 6, No. 4, 2013, pp. 359-371.

13. Vikrant Bhakar, Venkata Vamsi K Uppala, A K Digalwar, K S Sangwan, Life Cycle Assessment of Smithy Training Processes, Procedia Engineering, vol 64, 2013, pp 1267-1275.

14. Kuldip Singh Sangwan, V Kumar and P J Singh, Stakeholders for environmentally conscious technology adoption in Indian micro, small and medium enterprises: an empirical study, International Journal of Management and Decision Making, Vol. 12, No. 1, 2012, pp 36-49.

 

2012

1. Kuldip Singh Sangwan, V Kumar and P J Singh, Stakeholders for environmentally conscious technology adoption in Indian micro, small and medium enterprises: an empirical study, International Journal of Management and Decision Making, Vol. 12, No. 1, 2012, pp 36-49.

2. J P Bhamu, S Kumar and Kuldip Singh Sangwan, Productivity and quality improvement through value stream mapping: a case study of Indian automotive industry, International Journal of Productivity and Quality Management, vol 10, No. 3, 2012, pp 288-306.

3. Navneet Khanna, Ainhara Garay, Luis M. Iriarte, Daniel Soler, Kuldip S. Sangwan and Pedro J. Arrazola, Effect of heat treatment conditions on the machinability of Ti64 and Ti54M alloys, Procedia CIRP, Vol 1,  2012, pp 477 – 482.

4. Kuldip Singh Sangwan, Part family formation in cellular manufacturing using fuzzy mathematics, Industrial Engineering Journal, vol V, No. 6, 2012, pp 40-46.

 2011
 

1.     Kuldip Singh Sangwan, Development of a multi criteria decision model for justification of green manufacturing systems, International Journal of Green Economics, vol 5, No. 3, 2011, pp 285-305

2.      Kuldip Singh Sangwan, Design of layout for cellular manufacturing systems using intercell and intracell flow, Industrial Engineering  Journal, vol II, No. 25, 2011, pp 23-26

3.      Girish Kant and Kuldip Singh Sangwan, Modeling and Simulation of Metal Cutting Processes, International Journal of Mechanical Engineering Research, vol 1, No. 1, 2011, pp 129-138.

4.      Kuldip Singh Sangwan and Rambabu Kodali, An intelligent hybrid model for the integrated design of cellular manufacturing systems, International Journal of Services and Operations Management, vol 9, No. 2, 2011, pp 202-226.

5.      A. K. Digalwar and Kuldip Singh Sangwan, An overview of existing performance measurement frameworks in the context of world class manufacturing performance measurement, International Journal of Services and Operations Management, vol 9, No. 1, 2011, pp 60-82.

 
 
 
 

 

Conferences
                                                                     2013 

1.      Navneet Khanna and Kuldip Singh Sangwan, Machinability analysis of Ti10.2.3 titanium alloys using ANOVA, In: Proc. of NAMRI/SME, vol 41, 2013.

2.      Vikrant Bhakar, Venkata Vamsi K Uppala, A.K.Digalwar, K.S.Sangwan, Life Cycle Assessment of Smithy Training Processes, Procedia Engineering, 64, pp 1267-1275, 2013

3.      Varinder Kumar Mittal, Patricia Egede, Christoph Herrmann, and Kuldip Singh Sangwan, Comparison of Drivers and Barriers to Green Manufacturing:A Case of India and Germany, In: Proc. Of 20th CIRP International Conference on Life Cycle Engineering, Singapore, 2013, p 723-728 (Available online in Springer)

4.      Jindal, A. and Sangwan, K. S., 2013. An Integrated Fuzzy Multi-Criteria Evaluation of Sustainable Reverse Logistics Network Models IEEE International Conference on Fuzzy Systems. Hyderabad (available online in IEEE explore)

5.   Vikrant Bhakar, A K Digalwar and Kuldip Singh Sangwan, Development of Organizational and Technological Performance Measures for Sustainable Manufacturing, In: Proc. Of International Conference on Management and Business Innovation, MNIT Jaipur, pp 4-8, 2013

6.      Vikrant Bhakar, Anupam Purwar, Avinash Nayak,Krishna kumar Jakob Singer, Patricia Edege, Christoph Herrmann, Kuldip Singh Sangwan, Life Cycle Assessment of Lathe Processes for training application, In: Proc. of International Conference on Management and Business Innovation, MNIT Jaipur, pp 9-13, 2013

7.   Vikrant Bhakar, Roshni Shah, Jakob Singer, Patricia Edege, Christoph Herrmann, Kuldip Singh Sangwan, Environmental Life Cycle Assessment of Carpentry Training Processes, In: Proc. Of 3rd International Conference on Production and Industrial Engineering, MNIT Jalandhar, p 48-53, 2013

8.       Girish kant, Vaibhav Rao, K.S Sangwan, Development of Predictive Models for Forces in Machining using Regression Analysis, Response surface Methodology, Artificial Neural Network and Support vector regression, In: Proc. Of 3rd International Conference on Production and Industrial Engineering, MNIT Jalandhar, p 130-139, 2013

9.       Girish Kant, Nalin Gupta, KS Sangwan, Measurement of tool chip interface temperature in machining: A Comprehensive Review, In: Proc. Of 3rd International Conference on Production and Industrial Engineering, MNIT Jalandhar, p 869-881, 2013

10.  Navneet Khanna, Kuldip Singh Sangwan, Machinability analysis of Ti6Al4V titanium alloy, In: Proc. Of 3rd International Conference on Production and Industrial Engineering, MNIT Jalandhar, p 915-919, 2013


 

Quick Links

    An institution deemed to be a University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2017 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios