For Google Scholar Page Click Here 

LIST OF PUBLICATIONS

International Journals

1. Vipin Gupta , N.Iniyan Thiruselvam, D.M.Kulkarni , Vikas Chaudhari, and S.Suraj, Anisotropy and deformation heterogeneity in additive manufactured carbon-reinforced PEEK, Journal of Mechanical Science and Technology, Accepted

2. Vipin Gupta , N.Iniyan Thiruselvam, D.M.Kulkarni , Vikas Chaudhari, and S.Suraj, Mechanical performance of additive manufactured PEEK composite, Nanoworld Journal, Accepted

3. Pozhil S N., Sachin Waigaonkar., Vikas Chaudhari (2022), Creep Behaviour of Rotomouldable Grade Materials: A Comparative Study, Polymer Degradation and Stability, Vol. 199, 109904-109915 (Elsevier Journal, Impact Factor- 5.204, SCIE & Scopus indexed)

4. Harichandra Chandekar, Vikas Chaudhari and Sachin Waigaonkar (2022), Theoretical models for stiffness prediction of short fibre composites, Materials Today: Proceedings, 57 (Part 2), 711- 714 (Elsevier Journal, Scopus indexed).

5. Swadesh Dixit and Vikas Chaudhari (2022), Investigation of Tensile Behavior of SA 387 Steel Using Acoustic Emission Monitoring, Recent Trends in Wave Mechanics and Vibrations: Proceedings of WMVC 2022, 792-798 (Springer International Publishing)
   DOI: 10.1007/978-3-031-15758-5_81.

6. Harichandra Chandekar, Swadesh Dixit, Vikas Chaudhari and Sachin Waigaonkar (2020), Analysis of Short Jute Fiber-Polypropylene Composite Using Experimental and XFEM Approach, Journal of Natural Fibers,(Taylor & Francis Journal, Impact Factor- 2.622, SCIE & Scopus indexed)
   DOI: 10.1080/15440478.2020.1870612.

7. Swadesh Dixit., Vikas Chaudhari., Kulkarni D.M.(2020), Mode-I Fracture Investigations of Pressure Vessel Steels: Experimental and Simulation study, Journal of Materials Engineering and Performance,  792-798  (Springer Journal, Impact Factor- 1.652, SCIE & Scopus indexed).

8. Harichandra Chandekar, Sachin Waigaonkar and Vikas Chaudhari (2020), Effect of chemical treatment on creep-recovery behavior of jute-polypropylene composites, 235 (2), 329-340 Journal of Materials: Design and Applications (Part L), (SAGE Journal, Impact Factor- 2.014, SCIE & Scopus indexed)
   https://doi.org/10.1177/1464420720963344 .

9. Harichandra Chandekar, Vikas Chaudhari and Sachin Waigaonkar (2020), A review of jute fiber reinforced polymer composites, Materials Today: Proceedings, 26(Part 2), 2079- 2082 (Elsevier Journal, Scopus indexed).

10. Swadesh Dixit, VikasChaudhari, D.M. Kulkarni (2020), Effect of tempering time on mechanical and fracture behavior of SA 387 Gr.11 pressure vessel steel, Journal of Materials Processing Technology, 276:116419 (Elsevier Journal, Impact Factor- 4.7, SCIE & Scopus indexed).

11. S. N. Pozhil, Narayanan M. Menon, Sachin D. Waigaonkar, Vikas Chaudhari (2020), An analytical model to predict the creep behaviour of linear low-density polyethylene (LLDPE) and polypropylene (PP) used in rotational moulding, Materials Today: Proceedings, 28 (Part 2), 888- 892 (Elsevier Journal, Scopus indexed).

12. Swadesh Dixit, Vikas Chaudhari (2020), Evaluation of fracture parameters to simulate fracture process zone for SA 516 pressure vessel steel, Materials Today: Proceedings, 28 (Part 2), 721- 724 (Elsevier Journal, Scopus indexed).

13. Harichandra Chandekar, Vikas Chaudhari, Sachin Waigaonkar and Adlete Mascarenhas, (2020), Effect of chemical treatment on mechanical properties and water diffusion characteristics of jute-polypropylene composites, Polymer Composites, 41, 1447-1461 (Wiley Journal, Impact Factor- 2.3, SCIE & Scopus indexed).

14. P.L. Ramkumar, D.M. Kulkarni, Vikas V. Chaudhari (2019), Fracture toughness of LLDPE parts using rotational moulding technology, International Journal of Materials and Product Technology, 58(4), 305- 322 (Inderscience Journal, Impact Factor- 0.714, SCIE & Scopus indexed).

15. Vikas Chaudhari, D. M. Kulkarni, Shivam Rathi, Akshay Sancheti, Swadesh Dixit (2018), Investigation of Cohesive Zone Model Parameters for Steel Used in Shipbuilding Structure, Mechanics of Solids, Structures and Fluids, ASME digital collection, doi.org/10.1115/IMECE2017-70977.

16. Vikas Chaudhari, Hari Chandekar, Jayesh Saboo and Adlete Mascarenhas (2018), Studies on thermo-mechanical properties of chemically treated jute-polyester composite, IOP Conference Series: Materials Science and Engineering, 330 (012032), doi:10.1088/1757-899X/330/1/012032 (Scopus indexed).

17. Vikas Chaudhari & D M Kulkarni (2016), Effect of ao/W ratio on fracture toughness parameter of extra deep drawn steel sheets: experimental and finite element studies, International Journal of Vehicle Structures & Systems, 8(4) 198 – 203 (Scopus indexed).

18. P L Ramkumar, D M Kulkarni and Vikas Chaudhari (2016), Effect of Cooling Medium on Fracture Toughness of Rotomoulded Product, Applied Mechanics and Materials, vol. 852, 85-90 (Scopus indexed).

19. Harichandra Chandekar and Vikas Chauhdari (2016), Flexural creep behaviour of jute polypropylene composites, IOP Conference Series: Material Science and Engineering, 149 (1), 012107 doi: 10.1088/1757-899X/149/1/012107 (Scopus indexed).

20. Chaudhari, V. V., Kulkarni, D. M. (2015), Influence of Loading Rate on Fracture Behaviour of Extra Deep Drawn Steel Sheets. Fatigue and Fracture of Engineering Materials and Structures, 38, 851- 859 (Wiley Journal, Impact Factor- 2.15, SCIE & Scopus indexed).

21. PL. Ramkumar, D.M. Kulkarni and V.V.Chaudhari (2014), Parametric and Mechanical Characterization of Linear Low Density Polyethylene (LLDPE) Using Rotational Moulding Technology, Sadhana - Academy Proceedings in Engineering Science, 39(3), 625- 635 (Springer Journal, Impact Factor- 1.05, SCIE & Scopus indexed).

22. Chaudhari, V. V., Kulkarni, D. M. and Prakash, R. (2011), Determination of critical CTOD using crack flank opening angle method in general yield regime. Fatigue and Fracture of Engineering Materials and Structures, 34, 260- 269 (Wiley Journal, Impact Factor- 1.8, SCIE & Scopus indexed).

23. Chaudhari, V. V., Kulkarni, D. M. and Prakash, R. (2010), Three- dimensional finite element analysis of fracture behavior in general yielding fracture mechanics. Journal of Mechanical Engineering, Strojnίcky Casopis, 61, c. 3, 131- 148.

24. Chaudhari, V. V., Kulkarni, D. M. and Prakash, R. (2009), Study of Influence of Notch Root Radius on Fracture Behaviour of Extra Deep Drawn Steel Sheets. Fatigue and Fracture of Engineering Materials and Structures, 32, 975- 986 (Wiley Journal, Impact Factor- 1.1, SCIE & Scopus indexed).

25. Kulkarni, D. M., Chaudhari, V. V., Prakash, R. and Kumar, A. N. (2008), Effect of thickness on fracture criterion in general yielding fracture mechanics. International Journal of Fracture. 151, 187–198 (Springer Journal, Impact Factor- 1.485, SCIE & Scopus indexed).

Book Chapter

1. Harichandra Chandekar, Vikas Chauhdari Sachine Waigoankar and N N Ghosh, “Thermal and dynamic mechanical analysis of jute polypropylene composites” in Advanced Polymeric Materials for Sustainability and Innovations, Edited by Sajith Thottathil, Sabu Thomas, Nandakumar Kalarikkal, Didier Rouxel, 367-376. New York: Apple Academic Press, eBook Published: 1 October 2018 doi: https://doi.org/10.1201/b22326.

National Journals

1. D.M. Kulkarni and Vikas Chaudhari (2012), Failure Analysis and Prevention: A Course for Undergraduates, Bulletin of Marine Science and Technology, Tolani Maritime Institute, Pune, Vol.7(1), pp.27–29.

International Conference in Abroad

1. Swadesh Dixit and Vikas Chaudhari. Investigation of Tensile Behavior of SA 387 Steel Using Acoustic Emission Monitoring.10th International Conference on Wave Mechanics and Vibrations (WMVC 2022), July 4 - 6, 2022, Lisbon, Portugal.

2. Pozhil S. N., Vikas Chaudhari, Sachin Waigaonkar. Effect of Thickness on the J-Fracture Toughness of Rotationally Moulded Polypropylene and Polyethylene.10th International Conference on Wave Mechanics and Vibrations (WMVC 2022), July 4 - 6, 2022, Lisbon, Portugal.

3. Vikas Chaudhari and Swadesh Dixit. Modeling of short fiber reinforced composite using Extended Finite Element Method (XFEM). International Conference with a theme on Functional Materials Technology Key Enabler for Industrial Revolution, American Association for Advances in Functional Materials (AAAFM), August 19-22, 2019, University of California Los Angeles (UCLA), Los Angeles, USA.

4. Vikas Chaudhari, D. M. Kulkarni, Shivam Rathi, Akshay Sancheti and Swadesh Dixit. Investigation of Cohesive Zone Model Parameters for Steel Used in Shipbuilding Structure. ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE2017), November 3-9, 2017, Tampa, Florida, USA.

International Conference in India

5. Harichandra Chandekar, Vikas Chaudhari and Sachin Waigaonkar. Theoretical models for stiffness prediction of short fibre composites. 3rd International Conference on Aspects of Materials Science and Engineering, 4- 5 March, 2022, Panjab University, Chandigarh, India.

6. Vikas Chaudhari. Design of Rotomoulded Products based on Fracture Mechanics Approach. Society of Asian Rotomoulders (StAR) Annual Conference & Trade Show 2019, 23-25 January, 2019, The GATEWAY Hotel Kochi, Kerala, India.

7. Vikas Chaudhari, Hari Chandekar, Jayesh Saboo and Adlete Mascarenhas. Effect of Chemical Treatment on Thermo-Mechanical Properties of Jute-Polyester Composite. International Conference on Recent Advance in Materials, Mechanical and Civil Engineering ICRAMMCE-2017, 1-2 June, 2017, MLRITM, Hyderabad, Telangana, India.

8. Harichandra Chandekar, Vikas Chauhdari Sachine Waigoankar and N N Ghosh. Mechanical Properties of Jute Fabric Reinforced Polypropylene Composites. Proceedings of International Conference on Macromolecules: Synthesis, Morphology, Processing, Structure, Properties and Applications (ICM-2016), 13-15 May 2016 at Mahatma Gandhi University, Kottayam, Kerala, India.

9. Harichandra Chandekar and Vikas Chauhdari. Flexural creep behavior of jute polypropylene composites. International Conference on Advances in Materials and Manufacturing Applications, 14 - 16 July 2016, Amrita Vishwa Vidhyapeetham University, Bangalore Campus, India.

10. Vikas Chaudhari and D M Kulkarni. Effect of ao/W ratio on fracture toughness parameter of extra deep drawn steel sheets: experimental and finite element studies. International Conference on Mechanical Engineering Design 2016,(ICMED2016),25-26 April 2016,SSN College of Engineering, Chennai, India.

11. P L Ramkumar, D M Kulkarni and Vikas Chaudhari. Effect of Cooling Medium on Fracture Toughness of Rotomoulded Product. International Conference on Mechanical Engineering Design 2016,(ICMED2016), 25-26 April 2016,SSN College of Engineering, Chennai, India.

12. Kulkarni DM, Chaudhari VV. An Elastic Plastic 3-D Finite Element Analysis of Crack Tip Stress Field In General Yielding Fracture Mechanics. Proceedings of International Conference on Computer Aided Engineering (CAE-2013) Department of Mechanical Engineering, IIT Madras, India. 19-21 December, 2013, page 50 – 54.

13. Chaudhari VV, Kulkarni DM. Effect of Strain Rate on Fracture Toughness of Extra Deep Drawn Steel Sheets: Experimental and Finite Element Approach. International Conference on Advances in Mechanical Engineering, ICAME S6/O6, May 29-31, 2013, College of Engineering Pune, Maharahstra, India.

14. D. M. Kulkari, Vikas Chaudhari, Ravi Prakash and Pravin Talan, “Experimental Characterization of Crack Growth Behaviour in Extra Deep Drawn Steel Sheets”, Proceedings of the 50th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM), December 2005.

National Conference

1. Vikas Chaudhari and Vinod Suryawanshi, “System Modeling Through Bond Graph”, Proceedings of National Conference on Advances in Mechanical Engineering (NAME- 2004), February 12-14, 2004, J N N College of Engineering, Shimoga, Karnataka, India.

2. Vinod Suryawashi and Vikas Chaudhari, “Artificial Neural Network Modeling of Extrude Honing Process”, Proceedings of National Conference on Development and Challenges in Manufacturing Engineering, March 18-20, 2004, MIT Manipal, Karnataka, India.

3. Vinod Suryawashi, Vikas Chaudhari, Mahesh Wavare and Ravindra Savangouder, “Modeling of Mechatronics System- A Bond Graph Approach”, Proceedings of National Conference on on Emerging Trends in Mechatronics, July 23-24, 2004, MIT Aurangabad, Maharashtra, India.