Doctoral Thesis Supervisor:
1. B. Ramana Murthy (2021PHXP0053H): Sept 2021 (Full-time: on-going)
Effect of tool-pin profiles on material flow and residual stresses in FSW butt-joints
of thick AA2219-T8 plates (tentative)
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
2. G. Prashanth Kumar Reddy (2020PHXP0040H): Nov 2020 (Full-time: on-going)
Numerical and Experimental Investigation on Quality Parameters of Resistance
Spot Welding of Similar and Dissimilar Metals
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
Principal Coordinator: Mr. Venugopal Gude, Add. Manager, NFC, Hyderabad.
3. Barla Madhavi (2010PHXF0028H): Dec 2017 (completed)
Experimental and Numerical Studies of Friction Stir Welded Joints of AA5052-
H32 Plates.
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
Masters (M.E Hons) Thesis Supervisor:
1. Akkaldevi Chaithanya (2019H1480151H): Jan – May 2021
Numerical Simulations and Experimental Validation of Minichannel Water Cooled Prismatic 20Ah LiFePO4 Battery
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Satyam Panchal, Adjunct Assistant Professor, Dept. of Mechanical & Mechatronics Engineering, University of Waterloo, Canada
2. Chitta Sandeep Dattu (2019H1480152H): Jan – May 2021)
Comparison of Lumped and 1D Electrochemical Models for Minichannel Water Cooled Prismatic 20Ah LiFePO4 Battery
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Satyam Panchal, Adjunct Assistant Professor, Dept. of Mechanical & Mechatronics Engineering, University of Waterloo, Canada
3. Ram Mohan Kartha (2017H1480145H): Jan – May 2018
Analysis of Thermal Management in 100kW PMSM SEMA Motor
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
4. Durgavajhala Pavan kumar (2017H1410097H): Jan – May 2018
Thermal Modelling of Industrial Baking Oven
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Anurag Nandwana, Corporate Research Center ABB, Bangalore
5. Ajit Namdeo Bhambure (2017H1480142H): Jan – May 2018
Multi-physics Modelling of Fuel Cells
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Mahesh Vaze, Senior Scientist, Corporate Research Center ABB, Bangalore
6. Amrita Balasaheb Yelikar (2013H148053H): Jan – May 2015
Computational Fluid Dynamics based Process Modelling, Optimization and Scale-up of Industrial Flotation Cell
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Mr. Venkoba Rao, General Manager, Tenova Delkor India, Bangalore
7. Manjunath P (2013H148049H): Jan – May 2015
Experimental Investigation on the Performance and Emission of a Variable Compression Ratio CI Engine using Diesel and Bio-diesel
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
8. Rinu Thomas (2013H148046H): Jan – May 2015
Experimental Investigation on the Effect of Compression Ratio on the Performance and Emission of SI Engine Fueled with Petrol and Petrol-Butanol Blend
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
9. Dileep Mathews Paul (2013H148051H): Jan – May 2015
CFD Studies on Colorless Distributed Combustion in Gas Turbines
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Mr. Venkoba Rao, General Manager, Tenova Delkor India, Bangalore
10. K. Sajun Prasad (2012H141023H): Jan – May 2014
Automatic Extraction of Mid-Surface for Plastic Parts in Automotive Body for Computer Aided Engineering
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Subramani Sellamani, Senior Section Manager, RNTBCI, Chennai
11. Deshpande Ruturaj Ramesh (2011H148042H): Jan – May 2013
Application of DEM-CFD Approach to Analyze Inferior Vena Cava Filters using STAR CCM+
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Sridhar Hari, Manager, CD-adapco, Bangalore
12. Alok Deshpande (2011H106133P): Jan – May 2013
Numerical Studies of Industrial Flameless Combustion
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
13. Shikha Rathi (2011H148043H): Jan – May 2013
Numerical Studies of Two-phase Flows in Vertical Pipe
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
14. Karthik Teja M (2011H14129H): Jan – May 2013
Numerical Studies of Residual Stresses in Friction Stir Welding Process
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
Bachelors (B.E Hons) Thesis Supervisor:
1. Jinaga Ujwal Kishore (2014A4TS0360H): Jan – May 2018
Numerical Simulations and Validation of Ablation Material for Rocket Nozzle
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. K. Ram Chandra Murthy
2. G. Arvind (2014A4TS0452H): Aug – Dec 2017
Double-Diffusive Heat Transfer in the Earth’s Outer Core
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Prof. Binod Sreenivasan, Center for Earth Science, IISc, Bangalore.
3. Dvivedi Rohan Vipulkumar (2014A4TS0456H): Aug – Dec 2017
Prototype Design of a Flexible Architecture Processor Design
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Soumya J.
4. Suryadevara Pruthvi (2013A4PS061H): Jan – May 2017
Develop a Workable Design of Airborne Wind Turbine Using CFD and FEA Simulations
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
5. Y. V. Nitin Mythreya (2011B5A4529H): Jan – May 2016
Model Development and Analysis of Feedwell Flow Dynamics in Thickeners
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
6. Sai Jathin Dhulipalla (2012B5A4657H): Aug – Dec 2016
CFD Simulations of Microfluidics on Lab-On-A-Chip Technology for DNA Synthesis
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
7. S. M. K. Praneeth (2011B2A4690H): Jan – May 2016
Simulations of Wind Turbine Airfoil Flow Dynamics for Different Process Conditions
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
8. Abhishek Goyal (2012A4TS142H): Jan – May 2016
CFD Studies on Selection of Elegant Numerical Frame Work for Mixing Phenomena in Industrial Flotation Cell
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
9. S. M. K. Praneeth (2011B2A4690H): Aug – Dec 2015
Design, Experimentation, Fabrication and Simulations of Wind Rotor for Low Power Applications
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. R. Krishnan, Dept. of Chemistry
10. M. Teja Venkateswara Rao (2010A4TS272H): Aug – Dec 2014
Progressive Die Design for Automotive Components
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: NA
11. K. Srimannarayana Sharat Gupta (2010A4TS165H): Jan – May 2014
CFD simulations using STAR-CCM+ for Biomedical Applications involving Aerosol Flows
Supervisor: Dr. Jeevan Jaidi
Co-supervisor: Dr. Sridhar Hari, Manager, CD-adapco, Bangalore