Authors: Y. V. D. Rao, C. Amarnath, Srinivasa Prakash Regalla, Arshad Javed, Kundan Kumar Singh
Publisher: Lecture Notes in Mechanical Engineering, Springer
Year: 2021
ISBN: 978-981-16-1769-0

Title: “Process Development and Stability Modeling of High-Speed Micromachining”
Authors: Mittal, R.K., Singh, K.K. and Singh, R.K.
Publisher: New Horizons in Metallurgy, Materials and Manufacturing (pp. 91-106). Springer, Singapore
Year: 2023
DOI: 10.1007/978-981-19-5570-9_6

Title: “Numerical Investigation on Dynamic Stability of a Pick and Place Robot Arm”
Authors: B Upendra, B Panigrahi, Kundan K. Singh, G R Sabareesh
Publisher: Lecture Notes in Mechanical Engineering, Springer
Year: 2021
DOI: 10.1007/978-981-16-1769-0_53

Title: “A Robust Image Analysis Method for Cutting Tool Wear Monitoring in High-Speed Micromilling Process”
Authors: Aman Sharma, Vaibhav Rathore, Brajesh Panigrahi, Kundan K. Singh
Publisher: Lecture Notes in Mechanical Engineering, Springer
Year: 2021
DOI: 10.1007/978-981-16-1769-0_31

Title: “Influence of Workpiece Mating Gap on Friction Stir Welding of 316L for Fixture Design on a Machine”
Authors: B. Raghu Prem, Kundan K. Singh, Ravi Shanker Vidyarthy
Publisher: Lecture Notes in Mechanical Engineering, Springer
Year: 2021
DOI: 10.1007/978-981-16-1769-0_26

1. Gururaja S, Brajesh P and Kundan K Singh, “Development of Deep Learning Method for Stability Prediction in Micromilling Process”, International Journal on Interactive Design and Manufacturing (IJIDeM) - Inprint 
2. Gururaja S, Brajesh P and Kundan K Singh, "The Effect of Speed-Varying Micro-Cutting Tool Dynamics on Stability During High Speed Micromilling of Ti6Al4V", ASME Journal of Micro-and Nano-manufacturing - Inprint
3. Sameer Taylur, S. Gururaja, Kundan K. Singh, Brajesh Kumar Panigrahi, “Machined Surface Image Analysis for Process Instability Identification in Micromilling of Ti6Al4V”, Manufacturing Letters, Volume 33, Supplement, 2022, Pages 174-182, ISSN 2213-8463, https://doi.org/10.1016/j.mfglet.2022.07.023. 
4. Singh, Kundan K., and Ramesh Singh. "Process Mechanics Based Uncertainty Modeling for Cutting Force Prediction in High Speed Micromilling of Ti6Al4V." Procedia Manufacturing 48 (2020): 273-282.
5. Singh, Kundan K., V. Kartik, and Ramesh Singh. "Stability Modeling with Dynamic Run-out in High Speed Micromilling of Ti6Al4V."International Journal of Mechanical Sciences150 (2019): 677-690.
6. Singh, Kundan K., Salil S. Kulkarni, V. Kartik, and Ramesh Singh. "A Free Interface Component Mode Synthesis Approach for Determining the Micro-end Mill Dynamics". ASME Journal of Micro and Nano-Manufacturing 6, no. 3 (2018): 031005.
7. Singh, Kundan K., V. Kartik, and Ramesh Singh. "Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V."ASME Journal of Manufacturing Science and Engineering 139, no. 5 (2017): 051005.
8. Singh, Kundan K., V. Kartik, and Ramesh Singh. "Modeling dynamic stability in high-speed micromilling of Ti–6Al–4V via velocity and chip load dependent cutting coefficients." International Journal of Machine Tools and Manufacture 96 (2015): 56-66.
9. Bandapalli C, Singh KK, Sutaria BM, Bhatt DV. “Experimental investigation of machinability parameters in high-speed micro-end milling of titanium (grade-2)”. The International Journal of Advanced Manufacturing Technology (2015):1-5.
10. Bandapalli C, Singh KK, Sutaria BM, Bhatt DV. “Experimental Investigation of Top Burr Formation in High-Speed Micro End Milling of Titanium Alloy”. Machining Science and Technology 22 (2018):989-1011.
11. Singh, Kundan K., Ramesh Singh, and V. Kartik. "Comparative Study of Chatter Detection Methods for High-Speed Micromilling of Ti6Al4V." Procedia Manufacturing 1 (2015): 593-606.
12. Singh, Kundan K., V. Kartik, and Ramesh Singh. "Component Mode Synthesis Approach for Micro End Mill Dynamics Considering Machine Tool Compliance." Procedia CIRP 58 (2017): 469-474.
13. Singh, Kundan K., and Ramesh Singh. “Chatter Stability Prediction in High Speed Micromilling of Ti6Al4V via Finite Element Based Micro End Mill Dynamics” Advances in Manufacturing 6, no. 1 (2018): 95-106.

1. Gururaja S, Srijeeth S, Brajesh P and Kundan K. Singh, “The Analysis of Chucking of Workpiece on Chatter During Turning of Inconel 718 for Gas Turbine Application”, Proceedings of the XVII Vibration Engineering & Technology of Machinery Conference, (VETOMAC), December 15-17, 2022, Institute of Engineering Pulchowk, Tribhuvan University, Nepal.
2. Akash Chadaram, Gururaja S, Rinku Mittal and Kundan K. Singh, “Tribological Performance Analysis of Textured Cutting Insert Created Via High Speed Micromilling Process”, World Congress on Micro and Nano Manufacturing (WCMNM-22), KU Leuven, Mechanical Engineering Department, September 19-22, 2022, Belgium.
3. Sameer Taylur, S. Gururaja, Kundan K. Singh, Brajesh Kumar Panigrahi, “Machined Surface Image Analysis for Process Instability Identification in Micromilling of Ti6Al4V”, 50^th SME North American Manufacturing Research Conference (NAMRC 50), Purdue University, June 27^th to July 1^st, 2022, USA.
4. Gururaja S, Kundan K Singh and Rinku K Mittal, “Analysis of Numerical Method for Modal Analysis of Thin Walled Structures for Achieving Low Cost Manufacturing”, North-East Research Conclave (NERC), IIT Guwahati, May 20-22, 2022, Assam, India.
5. Gururaja S, Kundan K Singh, Cutting Velocity and Chip Load Dependent Force Prediction in High Speed Micromilling of Ti6Al4V Using Deep Learning Method, World Congress on Micro and Nano Manufacturing (WCMNM-21) IIT-Bombay, September 21-23, 2021, Mumbai, India.
6. Singh, K., Mankar, A., Mittal, R. and Singh, R., Determination of Modal Parameters of Micro End Mills Using Tapered Beam Theory. International Conference on Precision, Meso, Micro & Nano Engineering (COPEN-11), IIT Indore, December 12-14, 2019, Best Paper Award.
7. Bandapalli C, Sutaria BM, Bhatt DV, Singh KK. Tool Wear Analysis of Micro End Mills – Uncoated and PVD Coated TiAlN & AlTiN in High Speed Micro Milling of Titanium Alloy - Ti-0.3Mo-0.8Ni. 8th CIRP Conference on High Performance Cutting (HPC 2018), Procedia CIRP 77 (2018): 626-629.
8. Bandapalli C, Sutaria BM, Bhatt DV, Singh KK. Experimental Investigation and Estimation of Surface Roughness using ANN, GMDH & MRA models in High Speed Micro End Milling of Titanium Alloy (Grade-5). Materials Today: Proceedings. 2017 Dec 31;4(2):1019-28.
9. Singh, Kundan K., V. Kartik, and Ramesh Singh. "Segmented Cutting Coefficient Based Chatter Modeling for High-Speed Micromilling of Ti6Al4V", ASME 2016 11th International Manufacturing Science and Engineering Conference, pp. V002T01A010-V002T01A010. American Society of Mechanical Engineers, 2016.
10. Singh, Kundan K., V. Kartik, and Ramesh Singh. “Modeling Dynamic Stability in High-speed Micromilling via Segmented Velocity-chip load dependent Cutting Coefficients,” 9^th International Conference on Precision, Meso, Micro and Nano Engineering, December 10-12, 2015, IIT Bombay, Mumbai, India.
11. Mittal, R.K., Singh, K., and Singh, R., “Effect of Lubrication on Dynamic Instability in High-Speed Micromilling of Ti-6Al-4V,” 4M/ICOMM 2015 International Conference on Micromanufacturing, Milan, Italy
12. Singh, K., Singh, R.  and Kartik, V., “Dynamic Stability of High Speed Micromilling Based on Modal Analysis for Determining the Tool-tip Dynamics,” Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), December 12-14, 2014, Guwahati, India.
13. Singh, K., Kartik, V. and Singh, R, “Modeling of Chatter-induced Instability in High-speed Micromilling of Ti-6Al-4V,” Proceedings of the 9th International Conference on Micro Manufacturing in NTU Singapore, 2014.
14. Mahawar, V., Singh, K. and Singh, R. “Micromachining Characterization of Ultrathin Ni-membranes,” Proceedings of the 9th International Conference on Micro Manufacturing in NTU Singapore, 2014.
15. Bharti, B., Singh, K., Kartik, V. and Singh, R., “Design and development of a versatile high-speed micromachining system,” International Conference on Precision, Meso, Micro and Nano Engineering, 2013.