2023

52

Wankhede, P., Narayanaswamy, N. G., Kurra, S., & Priyadarshini, A.  SPSA: An image processing based software for single point strain analysis. Software Impacts, (Accepted)

51

P.K. Gandla, S. Pandre, K. Suresh, N. Kotkunde, S.K. Singh, Evaluation of Fracture Limits of Deep Drawing Quality Steel using Stretching, Incremental Forming and Double Notch Tensile Tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering.(Accepted)

2022

50

Wankhede, P., Narayanaswamy, N. G., Kurra, S., & Priyadarshini, A.  A portable device for single point strain analysis in sheet metal forming processes. HardwareX, 12(2022), e00371. https://doi.org/10.1016/j.ohx.2022.e00371

49

L. Kanthi, P. Wankhede, S. Kurra, S.K. Singh,  Comparative Study of Flow Stress Modeling of Zircaloy-4 Sheets Manufactured

from Different Routes, Indian Journal of Engineering & Materials Sciences. 29 (2022) 786-793. https://doi.org/10.56042/ijems.v29i6.70299

48

P.K. Gandla, S. Pandre, K. Suresh, N. Kotkunde, A critical analysis of formability and quality parameters for forming a dome shape using multi-stage strategies in incremental forming process, Journal of Materials Research and Technology. 19 (2022) 1037–1048. https://doi.org/10.1016/j.jmrt.2022.05.064.

47

P. Wankhede, K. Mahesh, S. Kurra, A. Priyadarshini, N. Kotkunde, A comparative study on the effect of grid printing methods and camera hardware in automatic strain measurement through CGA, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (2022) 095440892211075. https://doi.org/10.1177/09544089221107527.

46

L. Kanthi, P. Wankhede, S. Kurra, S.K. Singh, S. Geetha Rajashekharan, Flow Stress Modeling of Tube and Slab Route Sheets of Zircaloy-4 Using Machine Learning Techniques and Arrhenius Type Constitutive Equations, J Mater Eng Perform. (2022). https://doi.org/10.1007/s11665-022-07102-x.

45

P. Wankhede, M. K, S. Kurra, S.K. Singh, Heat treatment and temperature effects on formability of AA2014-T6 in incremental forming, Materials and Manufacturing Processes. 37 (2022) 1384–1392. https://doi.org/10.1080/10426914.2021.2016813.

44

P. Wankhede, S. Kodey, S. Kurra, S. Radhika, A low cost surface strain measurement system using image processing for sheet metal forming applications, Measurement. 187 (2022) 110273. https://doi.org/10.1016/j.measurement.2021.110273.

43

S. Pandre, K. Suresh, S.K. Singh, R. Sujith, A study on tensile flow and strain hardening behaviour of β-Titanium at elevated temperatures, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (2022) 095440892211115. https://doi.org/10.1177/09544089221111583.

42

S. Pandre, N. Kotkunde, K. Suresh, S.K. Singh, Investigation of fracture forming limits of dual phase steel under warm incremental forming process, International Journal on Interactive Design and Manufacturing. (2022). https://doi.org/10.1007/s12008-022-00948-4.

41

S. Pandre, A. Morchhale, N. Kotkunde, K. Suresh, S.K. Singh, Stretch flanging behaviour and microstructural analysis of DP steel using punch stretching and incremental forming processes, Archives of Civil and Mechanical Engineering. 22 (2022) 163. https://doi.org/10.1007/s43452-022-00483-9.

40

S. Pandre, G.P. Kumar, N. Kotkunde, K. Suresh, S.K. Singh, Analysis of forming characteristics for dual phase steel under warm incremental forming process, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (2022) 095440892210942. https://doi.org/10.1177/09544089221094209.

2021

39

S. Pandre, A. Morchhale, G. Mahalle, N. Kotkunde, K. Suresh, S.K. Singh, Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution, Archives of Civil and Mechanical Engineering. 21 (2021) 95. https://doi.org/10.1007/s43452-021-00243-1.

38

S. Pandre, A. Morchhale, N. Kotkunde, S. Kurra, Processing of DP590 steel using single point incremental forming for automotive applications, Materials and Manufacturing Processes. 36 (2021) 1658–1666. https://doi.org/10.1080/10426914.2021.1942903.

37

W. Pankaj, T. Radhakrishnan, K. Suresh, S. Radhika, CGA: An image processing based software for surface strain analysis in sheet metal forming, J Strain Anal Eng Des. 56 (2021) 519–530. https://doi.org/10.1177/0309324721996575.

36

P. Wankhede, T. Radhakrishnan, S. Radhika, S. Kurra, Corner detection of a quadrilateral for strain analysis in sheet metal forming by image processing, Advances in Materials and Processing Technologies. (2021) 1–11. https://doi.org/10.1080/2374068X.2021.1878710.

35

P.K. Gandla, S. Kurra, K.S. Prasad, S.K. Panda, S.K. Singh, Effect of pre-cut hole diameter on deformation mechanics in multi-stage incremental hole flanging of deep drawing quality steel, Archives of Civil and Mechanical Engineering. 21 (2021) 16. https://doi.org/10.1007/s43452-020-00156-5.

34

K.G. Praveen, S. Kurra, Analysis of deformation behavior in various incremental tube forming processes, Materials and Manufacturing Processes. 36 (2021) 1631–1641. https://doi.org/10.1080/10426914.2021.1926493.

33

S. Kurra, S. K, S. Bade, P. Kumar G, Analysis of fine blanking process through finite element simulations, Advances in Materials and Processing Technologies. 7 (2021) 352–361. https://doi.org/10.1080/2374068X.2020.1785203.

2020

32

Kanthi, L., Kurra, S., & Singh, S. K. (2020). Flow stress prediction of zircaloy-4 at elevated temperatures using KHL constitutive model. Advances in Materials and Processing Technologies, 6(2), 310-319.

31

P. Wankhede, K. Suresh, A review on the evaluation of formability in sheet metal forming, Advances in Materials and Processing Technologies. 6 (2020) 458–485. https://doi.org/10.1080/2374068X.2020.1731229.

30

P.K. Gandla, V. Inturi, S. Kurra, S. Radhika, Evaluation of surface roughness in incremental forming using image processing based methods, Measurement. 164 (2020) 108055. https://doi.org/10.1016/j.measurement.2020.108055.

29

P. Wankhede, K. Suresh, A review on the evaluation of formability in sheet metal forming, Advances in Materials and Processing Technologies. 6 (2020) 458–485. https://doi.org/10.1080/2374068X.2020.1731229.

2019

28

G. Praveen, R.T. Reddy, K. Suresh, Experimental studies on incremental hole flanging of steel sheets, Advances in Materials and Processing Technologies. 5 (2019) 418–428. https://doi.org/10.1080/2374068X.2019.1622296.

27

P. kumar G, K. Suresh, Experimental Study On Force Measurement For AA 1100 Sheets Formed By Incremental Forming, Mater Today Proc. 18 (2019) 2738–2744. https://doi.org/10.1016/j.matpr.2019.07.137.

26

A. Saxena, A. Kumaraswamy, N. Kotkunde, K. Suresh, Constitutive Modeling of High-Temperature Flow Stress of Armor Steel in Ballistic Applications: A Comparative Study, J Mater Eng Perform. 28 (2019) 6505–6513. https://doi.org/10.1007/s11665-019-04337-z.

25

K. Limbadri, S.K. Singh, K. Satyanarayana, A.K. Singh, A. Maruthi Ram, M. Ravindran, M. Krishna, M. Chaitanya Reddy, K. Suresh, Effect of Processing Routes on Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Elevated Temperatures, Metallography, Microstructure, and Analysis. 8 (2019) 393–405. https://doi.org/10.1007/s13632-019-00544-1.

24

S.K. Singh, K. Limbadri, A.K. Singh, A.M. Ram, M. Ravindran, M. Krishna, M.C. Reddy, K. Suresh, K.S. Prasad, S.K. Panda, Studies on texture and formability of Zircaloy-4 produced by pilgering route, Journal of Materials Research and Technology. 8 (2019) 2120–2129. https://doi.org/10.1016/j.jmrt.2018.11.018.

23

A. Sharma, B. Vasudevan, R. Sujith, N. Kotkunde, K. Suresh, A. Kumar Gupta, Effect of Graphene Nanoplatelets on the Mechanical Properties of Aluminium Metal Matrix Composite, Mater Today Proc. 18 (2019) 2461–2467. https://doi.org/10.1016/j.matpr.2019.07.095.

2018

22

K. Suresh, P. Kumar G, A. Priyadarshini, N. Kotkunde, Analysis of formability in incremental forming processes, Mater Today Proc. 5 (2018) 18905–18910. https://doi.org/10.1016/j.matpr.2018.06.239.

21

K. Limbadri, S.K. Singh, K. Satyanarayana, A.K. Singh, A.M. Ram, M. Ravindran, K.V.M. Krishna, M.C. Reddy, K. Suresh, Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Room Temperature, Metallography, Microstructure, and Analysis. 7 (2018) 421–433. https://doi.org/10.1007/s13632-018-0463-0.

20

S. Kurra, N. Swetha, C. Vinodh Reddy, S. Regalla, Experimental and finite element studies of single stage incremental forming process: effect of process parameters on maximum wall angle and thickness distribution, Advances in Materials and Processing Technologies. 4 (2018) 322–334. https://doi.org/10.1080/2374068X.2017.1420290.

19

A. Priyadarshini, C.P. Kiran, K. Suresh, Effect of Friction on Barreling during cold Upset Forging of Aluminium 6082 Alloy Solid cylinders, IOP Conf Ser Mater Sci Eng. 330 (2018) 012072. https://doi.org/10.1088/1757-899X/330/1/012072.

18

K. Limbadri, K. Toshniwal, K. Suresh, A. Kumar Gupta, V. v Kutumbarao, M. Ram, M. Ravindran, G. Kalyankrishnan, S. Kumar Singh, Stress Variation of Zircaloy-4 and Johnson Cook Model for rolled sheets., Mater Today Proc. 5 (2018) 3793–3801. https://doi.org/10.1016/j.matpr.2017.11.632.

17

K. Suresh, S. Prakash Regalla, N. Kotkundae, Finite Element Simulations Of Multi Stage Incremental Forming Process, Mater Today Proc. 5 (2018) 3802–3810. https://doi.org/10.1016/j.matpr.2017.11.633.

2017

16

K. Suresh, HR. Nasih, N. Jasti, M. Dwivedy, Experimental Studies in Multi Stage Incremental Forming of Steel Sheets, Mater Today Proc. 4 (2017) 4116–4122. https://doi.org/10.1016/j.matpr.2017.02.316.

15

N.V.K. Jasti, S. Kurra, An empirical investigation on lean supply chain management frameworks in Indian manufacturing industry, International Journal of Productivity and Performance Management. 66 (2017) 699–723. https://doi.org/10.1108/IJPPM-12-2015-0185.

2016

14

S. Kurra, N. HR, S. Regalla, A.K. Gupta, Parametric study and multi-objective optimization in single-point incremental forming of extra deep drawing steel sheets, Proc Inst Mech Eng B J Eng Manuf. 230 (2016) 825–837. https://doi.org/10.1177/0954405414564408.

13

S.P. Regalla, K. Suresh, Hybrid Rapid Spinning and Incremental Sheet Metal Forming of Extra Deep Drawing (EDD) Steel, in: Volume 2: Advanced Manufacturing, American Society of Mechanical Engineers, 2016. https://doi.org/10.1115/IMECE2016-65979.

2015

11

S. Kurra, S.P. Regalla, R. Pérez-Santiago, Study on influence of process parameters in incremental forming using finite element simulations and Taguchi orthogonal array, Advances in Materials and Processing Technologies. 1 (2015) 201–209. https://doi.org/10.1080/2374068X.2015.1118993.

10

S. Kurra, N. Hifzur Rahman, S.P. Regalla, A.K. Gupta, Modeling and optimization of surface roughness in single point incremental forming process, Journal of Materials Research and Technology. 4 (2015) 304–313. https://doi.org/10.1016/j.jmrt.2015.01.003.

9

K. Suresh, S.D. Bagade, S.P. Regalla, Deformation Behavior of Extra Deep Drawing Steel in Single-Point Incremental Forming, Materials and Manufacturing Processes. 30 (2015) 1202–1209. https://doi.org/10.1080/10426914.2014.994755.

2014

8

K. Suresh, S.P. Regalla, Effect of Mesh Parameters in Finite Element Simulation of Single Point Incremental Sheet Forming Process, Procedia Materials Science. 6 (2014) 376–382. https://doi.org/10.1016/j.mspro.2014.07.048.

7

K. Suresh, S.P. Regalla, Analysis of Formability in Single Point Incremental Forming Using Finite Element Simulations, Procedia Materials Science. 6 (2014) 430–435. https://doi.org/10.1016/j.mspro.2014.07.055.

6

K. Surech, S.P. Regalla, Effect of Time Scaling and Mass Scaling in Numerical Simulation of Incremental Forming, Applied Mechanics and Materials. 612 (2014) 105–110. https://doi.org/10.4028/www.scientific.net/AMM.612.105.

5

S. Kurra, S.P. Regalla, Experimental and numerical studies on formability of extra-deep drawing steel in incremental sheet metal forming, Journal of Materials Research and Technology. 3 (2014) 158–171. https://doi.org/10.1016/j.jmrt.2014.03.009.

2013

4

S. Choudhary, C.M. Tejesh, S.P. Regalla, K. Suresh, Parametric analysis of plastic strain and force distribution in single pass metal spinning, in: AIP Conf Proc, 2013: pp. 1069–1072. https://doi.org/10.1063/1.4850156.

3

S. Kurra, S.P. Regalla, Formability of extra deep drawn steel in single point incremental forming, in: AIP Conf Proc, 2013: pp. 856–859. https://doi.org/10.1063/1.4850105.

2

K. Suresh, A. Khan, S.P. Regalla, Tool Path Definition for Numerical Simulation of Single Point Incremental Forming, Procedia Eng. 64 (2013) 536–545. https://doi.org/10.1016/j.proeng.2013.09.128.

2012

1

S. Kurra, S. Regalla, Simulation of forces and strains in single point incremental forming process, Journal of Machining and Forming Technologies. (2012).