BITS Pilani

  • Page last updated on Wednesday, June 28, 2023

You are here:

Publications

banner
Publications

Publications

Journal Papers:

  1. Gulshan Kumar, S. Balo, A. Dhoble, J. Singh, R. Singh, D. Srivastava, G. K. Dey, and I. Samajdar, “Through thickness deformation gradient in a part-pilgered zirconium tube: Experimental measurements and numerical validation”, Metallurgical and Materials Transaction A (2017) 48: 2844, DOI: 10.1007/s11661-017-4032-y. 
  2. Gulshan Kumar, A.K. Kanjrala, A. Lodh, Ramesh Singh, Jaiveer Singh, D. Srivastava, G.K. Dey, N. Saibaba, and I. Samajdar, "Burst Ductility of Zirconium Clad: The Defining Role of Residual Stress”, Metallurgical and Materials Transaction A, Volume 47 (2016) 3882. DOI: 10.1007/s11661-016-3526-3.
  3. Gulshan Kumar, Ramesh Singh, Jaiveer Singh, D. Srivastava, G.K. Dey, I. Samajdar, "Defining the stages of annealing in a moderately deformed commercial Zirconium alloy", J. Nucl. Mater., 466 (2015) 243-252. DOI:10.1016/j.jnucmat.2015.07.048.
  4. Gulshan Kumar, Arijit Lodh, Jaiveer Singh, Ramesh Singh, D. Srivastava, G.K. Dey, I. Samajdar, " Experimental Characterization and Finite Element Modeling of Through Thickness Deformation Gradient in a Cold Rolled Zirconium Sheet", CIRP Journal of Manufacturing Science and Technology, 19 (2017) 176-190, DOI: 10.1016/j.cirpj.2017.09.002.
  5. Jaiveer Singh, S. Mahesh, Shomik Roy, Gulshan Kumar, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar, “Temperature dependence of work hardening in sparsely twinning zirconium”, Acta Materialia, 123 (2017) 337-349. DOI:10.1016/j.actamat.2016.10.049.
  6. Jaiveer Singh, S. Mahesh, Shomic Roy, Gulshan Kumar, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar, "A miniature physical simulator for pilgering", J. Mater. Process. Technol. 237 (2016) 126-138, DOI: 10.1016/j.jmatprotec.2016.06.009.
  7. Jaiveer Singh, S. Mahesh, Gulshan Kumar, Prita Pant, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar, "Deformation Twinning in Zirconium: Direct Experimental Observations and Polycrystal Plasticity Predictions", Metall. Mater. Trans. A, Vol. 46, Issue 11 (2015) 5058-5071, DOI: 10.1007/s11661-015-3085-z.
  8. Jaiveer Singh, S. Mahesh, Gulshan Kumar, Prita Pant, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar, “Texture  Development  and  Plastic  Deformation  in  a  Pilgered  Zircaloy-4  Tube”, Metall. Mater. Trans. A, 46A (2015) 1927-1947, DOI: 10.1007/s11661-015-2807-6.
  9. Nabaneeta Mukhopadhyay, Ajay S. Panwar, Gulshan Kumar, I. Samajdar, Arup R. Bhattacharyya, “Influence of non-covalent modification of multiwalled carbon nanotubes on the crystallization behaviour of binary blends of polypropylene and polyamide 6”, Phys. Chem. Chem. Phys., Volume 17(6) (2015) 4293-4310, DOI: 10.1039/C4CP05060F.
  10. Amit Kumar, Darshan Chalapathi, Gulshan Kumar, Rajesh Khatirkar, Satyam Suwas, “Microstructure and texture development during cold rolling in UNS 32205 and UNS 32760 duplex stainless steels”, Metallurgical and Materials Transaction A (2017) 48: 2349, DOI: 10.1007/s11661-017-4026-9.
  11. S K Sahoo, S Panda;R.K. Sabat; G Kumar; S.C. Mishra; U.K. mohanty; S Suwas, "Effect of Pre-annealing Strains on Annealing Texture Development in commercially Pure (CP) Titanium", Philos. Mag., 95 (2015) 1105-1124, DOI: 10.1080/14786435.2015.1020905.
  12. S Panda, S K Sahoo, A Dash, M Bagwan, G Kumar, S C Mishra, S Suwas, "Orientation Dependent Mechanical Properties of Commercially Pure (cp) Titanium", Mater. Chract., 98 (2014) 93-101, DOI: 10.1016/j.matchar.2014.10.011.
  13. Aruna Devi, A. P. Srivastava, R. Menon, K. V. Mani Krishna, S. Neogy, G. Kumar, P. Y. Nabhiraj, D. Srivastava & G. K. Dey, Study on the effect of Ar9+ ion irradiation of Zr–2.5 wt.% Nb alloy pressure tube, Philosophical Magazine, (2018) DOI: 10.1080/14786435.2018.1543963.
  14. Biswanath Bhoi, N. Venkataramani, Shiva Prasad, R.P.R.C. Aiyar, Gulshan Kumar, I. Samajdar, M. Kostylev, “Observation of enhanced magnetic anisotropy in PLD YIG thin film on GGG (1 1 1) substrate”, Journal of Magnetism and Magnetic Materials, 483 (2019) 191-195, DOI:10.1016/j.jmmm.2019.03.111.
  15. Arijit Lodh, Prita Pant, Gulshan Kumar, Indradev Samajdar, “Orientation Dependent Solid Solution Strengthening in Zirconium: A Nanoindentation Study” Journal of Materials Science, (2019). https://doi.org/10.1007/s10853-019-04280-3. 
  16. N. Harshavardhana, Sunder Singh, Gulshan Kumar and Ashish Kumar Saxena,” A Comparative study on misorientations to determine the extent of recrystallization in pure ETP Copper”, Physics of Metals and Metallography, (2021) https://doi.org/10.1134/S0031918X20140094.
  17. Priya Sudha K; K. S. Tun; Manoj Gupta; Gulshan Kumar; Vincent Kumar, Biocorrosion studies of a Novel Mg70Al18Zn6Ca4Y2 low entropy multicomponent alloy in different simulated body fluids, Journal of Applied Electrochemistry 52, 1109-1120 (2022), https://doi.org/10.1007/s10800-022-01685-y
  18. Natarajan, Harshavardhana; sivam, sundar; Kumar , Gulshan ; Saxena, Ashish Kumar, A study on microstructure and recrystallization Kinetics on low deformed pure ETP copper, Journal of Materials: Design and Applications, (June 2022), https://doi.org/10.1177/14644207221096543.(Link)
Conference Proceedings:

  1. Gianender Kajal, M R Tyagi, Gulshan Kumar, “A review on the effect of residual stresses in incremental sheet metal forming used in automotive and medical sectors”, Materials Today: Proceedings (Nov 2022), https://doi.org/10.1016/j.matpr.2022.11.235
  2. Aruna Devi; Neogy, S.; Srivastava, D.; Dey, G.K.; Menon, Ranjini; Nabhiraj, P.Y.; Kumar, G.; Samajdar, I., “Characterization of heavy ion induced defects in Zr-2.5 wt. % Nb by grazing incidence X-ray diffraction”, Proceedings of the international conference on electron microscopy and thirty sixth annual meeting of the Electron Microscope Society of India: abstract book and souvenir, 47(2) (2015).
  3. I Samajdar, Gulshan Kumar, Jaiveer Singh, Arijit Lodh, D Srivastava, R Tewari, GK Dey, N Saibaba, “Zirconium microstructures: uncharted possibilities”, Proceedings of the international conference on electron microscopy and thirty sixth annual meeting of the Electron Microscope Society of India: abstract book and souvenir, 47(2) (2015).
  4. S. Panda, G. Kumar, S.C. Mishra, S. Suwas,S. K. Sahoo, “Recrystallization Texture in Commercially Pure (CP) Titanium”, 17th International Conference on Textures of Materials, August 24 - 29, 2014, Dresden.
  5. Rohit Kumar, Gulshan Kumar, Arshpreet Singh, “An Assessment of Residual Stresses and Micro-Structure during Single Point Incremental Forming of Commercially Pure Titanium Used in Biomedical Applications”, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies, 20th-22nd November 2019, Dubai, U.A.E. (BEST PAPER AWARD, Young Researcher Award 2020 to Rohit)

 Book Chapters: 

  1. Kumar R., Kumar G., Gautam V., Konar S., Experimental and Numerical Assessment of Residual Stresses in AA6061 After Surface Treatment by Deep Cold Rolling. In: Narayanan R., Joshi S., Dixit U. (eds) Advances in Computational Methods in Manufacturing, (2019) 95-108, Springer, Singapore. https://doi.org/10.1007/978-981-32-9072-3_9.

  


 

Quick Links

    An Institution Deemed to be University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2024 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios