Laboratories:
Electrical Machines Lab:
Electrical Machines Lab provides the essential facilities to the students to augment their concepts about the fundamentals of transformers and rotating machines. It is well equipped Lab to provide experimental and hands-on experience to the undergraduate students as a part of their course curriculum. The students are exposed to the detailed study of characteristic and operational aspects of different electrical machines, viz, DC machine, AC machine, transformers etc. Through hands-on experiments with real machines, students gain practical experience all of which help to increase the technical skills of students.
Power Electronics Lab:
Power Electronics Lab is being designed for the third year Electrical and Electronics Engineering and Instrumentation students. The lab aims at imparting practical outlook for conversion of power from one form to another. The introduction to different types of switches and their applications, design of circuits for power conversion and their applications are the primary goal of the lab. The students can further use the knowledge thus gained for various real life applications renewable energy system design.
Communication Systems Lab:
In Communication systems lab, there is a lot of scope for the students to study in detail about various types of Modulators and De-Modulators, Transceivers and Spectrum Analyzer along with the different types of Filters and their design and usage and also different types of Pulse Code Modulation (PCM) formats. In this lab, mathematical models are designed and simulated in MATLAB and perform the practical simulation using hardware kits. In microwave,X band signal is generated using Reflex Klystron or Gunn oscillator and transmitted through rectangular wave guide and detected by using detector. Detected signal can be seen on DSO and measurements of X band signal can be performed by using instruments such as Frequency meter, VSWR meter etc. Various microwave components characteristics can be tested. Horn antenna can be used to transmit as well as to receive the signal.
Analog & Digital Electronics Lab:
This Lab is associated with a compulsory disciplinary course and serves to consolidate fundamental concepts in the field of Digital Electronics. The objective of the lab is to impart knowledge of the basic tools for the design of digital circuits and to provide methods and procedures suitable for a variety of digital design applications. The lab provides laboratory practice using MSI devices and covers the topics on logic circuits and minimization, Combinational and sequential logic circuit design, Design and application of Counters, Arithmetic Circuit implementation, Shift register Applications etc. This lab also includes HDL tools like Verilog/VHDL which are used to describe and simulate different circuits.
Also This lab deals with various electronic techniques and building blocks used in analog signal processing. Experiments and projects using discrete IC modules will be carried out in the laboratory. The experiment topics range from study of basic circuits like common emitter amplifier, basic Op-Amp configurations etc. to advanced topics like Study of Filters, Oscillators and applications of Integrated circuit timers.
Signal Processing and Simulation Lab:
This undergraduate lab course provides analysis, design and practical Insights into waveform generation and filtering, signals, sampling, filtering, quantization, oversampling, noise shaping, and data converters, system training and calibration communication transmission and reception, Other applications include audio, biomedical and image processing. This course emphasizes tradeoffs in signal quality vs. implementation complexity in algorithm design, and is accessible by first-semester third-year undergraduates. In the course, students use signal processing theory to derive signal processing algorithms, convert signal processing algorithms to desktop simulations in Matlab, and map the algorithms onto embedded real-time software running on a Texas Instruments digital signal processor board.
Instrumentation Lab:
This Lab is equipped with transducers experimental setups, process control experimental setup and Virtual instrumentation components such as LabView etc.
Lab Facilities
1. ELECTRICAL MACHINES LABORATORY:
| Serial No. | Item List |
| 1 | Different types of Electrical Motor-Generator coupled sets. |
| 2 | Single Phase Transformers |
| 3 | Loading Rheostats, Inductors and Capacitors. |
| 4 | Measuring Instruments (Analog and Digital types) ----Ammeters, Voltmeters, Wattmeters, Tachometers (Digital Type) |
2. POWER ELECTRONICS LABORATORY :
| Serial No. | Item List |
| 1 | BUCK, BOOST and BUCK - BOOST Converters, |
| 2 | Power Electronic Rectifier and Inverter. |
| 3 | Three phase HV Thyristor control trainer, Three phase Induction Motor Speed Control Trainer. |
| 4 | SCR Trainer Kit. |
| 5 | Dynamic characteristics study kit for BJT, MOSFET and IGBT. |
3. COMMUNICATION SYSTEMS LAB:
| Serial No. | Item List |
| 1 | Amplitude Modulation & Demodulation setup Kit |
| 2 | Single Side Band Modulation & Demodulation setup Kit |
| 3 | Frequency Modulation & Demodulation setup Kit |
| 4 | Pulse Code Modulation & Demodulation setup Kit |
| 5 | Delta Modulation & Demodulation setup Kit |
| 6 | PAM-PPM-PWM Modulation & Demodulation setup Kit |
| 7 | Carrier Recovery Module |
| 8 | Data Conditioning & Carrier Modulation & Demodulation (ASK-FSK-PSK) setup Kit |
| 9 | QPSK Modulation & Demodulation Kit |
| 10 | Noise Generator & Its Applications (Eye – Pattern) Kit |
| 11 | PN Sequence Generator Kit |
| 12 | 4 Channel Analog TDM System |
| 13 | Frequency Division Multiplexer & Demultiplexer |
| 14 | Tuned Circuit Kit |
| 15 | Fiber Optic Kits |
| 16 | Antenna System |
| 17 | Klystron Based Microwave Test Bench |
| 18 | Gunn Based Microwave Test Bench |
| 19 | Spectrum Analyzer |
| 20 | Mixed Signal Oscilloscope |
| 21 | Digital Storage Oscilloscopes |
| 22 | Cathode Ray Oscilloscopes |
| 23 | Arbitrary Waveform Generator |
| 24 | Function Generators |
| 25 | Pulse Generators |
| 26 | Digital & Analog Trainer System |
| 27 | Universal Frequency Counters |
| 28 | Bread Boards with Power Supply |
| 29 | Digital Multimeters |
4. ANALOG & DIGITAL ELECTRONICS LAB:
| Serial No. | Item List |
| 1 | AC Milli Voltmeter |
| 2 | Audio Generator |
| 3 | DC Power Supply |
| 4 | Bread Board with DC Supply |
| 5 | Temperature Controlled Soldering Station |
| 6 | Soldering Iron Stand |
| 7 | Soldering Iron |
| 8 | True RMS Digital Multimeter |
| 9 | IC Tester Linear |
| 10 | IC Tester Digital |
| 11 | Decade Capacitance Box |
| 12 | Decade Inductance Box |
| 13 | Decade Resistance Box |
| 14 | Op-Amp. Demo. Trainer |
5. SIGNAL PROCESSING AND SIMULATION LAB:
Software:
| Serial No. | Item List |
| 1 | Matlab |
| 2 | Code Composer Studio V6.1 |
| 3 | Multisim |
| 4 | PSpice |
| 5 | Xilinx ISE |
| 6 | Mi Power10 |
| 7 | Cadence |
Hardware:
| Serial No. | Item List |
| 1 | DSP Starter Kits TMS320C6713 |
| 2 | DSP Starter Kits TMS320C6416 |
| 3 | DSP Starter Kits TMS320C6748 |
| 4 | Spartan 6 |
| 5 | Spartan 3A & 3AN |
| 6 | ARM Embedded Kit |
| 7
| Mobile Brainwear (Emotiv EPOC x14)
|
6. INSTRUMENTATION LAB:
| Serial No. | Item List |
| 1 | LCR Meter |
| 2 | Basic Electricity & Electronics Trainer |
| 3 | Level & Temperature Measurement |
| 4 | 8085 Microprocessor RTD Temperature Measurement with ADC |
| 5 | LVDT (Linear Displacement) |
| 6 | Strain Gauge & Load Cell |
| 7 | Capacitive Pick Up (Angular) |
| 8 | Micro Processor Based Stepper Motor Control |
| 9 | Data Acquisition System |
| 10 | ADC/DAC Interface Module |
| 11 | Digital CRO with GPIB |
| 12 | Logic Analyzer with GPIB |
| 13 | LDAF with GPIB |
| 14 | Lab View - FDS & PCI GPIB |
| 15 | Level, Flow & Temperature Process |
| 16 | Pressure Process Trainer |
| 17 | Transducers |
| 18 | Power Supply Design |
| 19 | Process Control Trainer |
| 20 | Instrumentation Trainer |
| 21 | 40 MHz Dual Trace CRO |
| 22 | Multi Point DC Power Supply |
| 23 | Low Distortion Signal Generator Upto 1 MHz |
| 24 | Digital True RMS Multimeter |
| 25 | DMM with GPIB & GPIB cable |
| 26 | PLC Module & Its Hardware Expt., |
| 27 | Digital Multimeter |
| 28 | Process Recorder |
| 29 | NI ELVIS/PCI-6251 Bundle |
| 30 | pH Process Trainer |
| 31 | LABVIEW 2014 Software |